Chicago Gaming Arcade Legends User Manual

Owner’s Manual

Chicago Gaming Company, 4616 W. 19th Street, Cicero, IL 60804 [phone]

© & ™ 2005 UltraCade Technologies All Rights Reserved

ARCADE LEGENDS

TM

1. LEGAL INFORMATION

1.1 SAFETY NOTICES

The following safety instructions apply to all game owners. We recommend that you
read this page before setting-up Arcade Legends. Use the following safety guidelines to
help protect the system from potential damage and to ensure your personal safety.

• Use with only 115 volts/60Hz

• To help prevent electric shock, plug the system power cables into properly

grounded power sources. These cables are equipped with 3-prong plugs to help
ensure proper grounding. Do not use adapter plugs or remove the grounding
prong from a cable. If you must use an extension cable, use a 3 wire cable with
properly grounded plugs.

• To help protect your system from sudden, transient increases and decreases in
electrical power, use a surge suppressor, line conditioner or uninterruptible power
supply (UPS).

• Do not spill food or liquid on your system.

• Do not push any objects into the openings of the system. Doing so can cause fire

or electric shock by shorting out interior components.

• Keep your game far away from radiators and heat sources.

• Do not block cooling vents.

• Be sure to turn off power before working on the machine

• Be sure to use fuses which meet the specified rating. (5A, 220V Quick-blow).

Using fuses exceeding the specified rating can cause a fire and electrical shock.

• When working around the monitor, be extremely careful. Monitor parts are
subject to high tension voltage. Even after turning off power some portions are
still subject to high tension voltage. Monitor repair and replacement should be
performed only by technical personnel who have knowledge of electricity and
technical expertise.

1.2 ENVIRONMENTAL CONDITIONS

Arcade Legends is intended for indoor use only. Be sure to keep dry and maintain
operating temperatures of 50-104° Fahrenheit.

1.3 LICENSE INFORMATION JOSHUA OPERATING SYSTEM
The Joshua OS

Technology, Inc. retains all rights to the code, trademarks and copyrights. By accepting
and operating an Arcade Legends, the owner/operator the unit agrees to abide by all
copyrights and trademarks and not to attempt to decompile or modify the operating
system in anyway. Questions regarding this operating system should be directed to
technical support at www.ultracade.com or [e-mail]. Joshua OS is
copyrighted 2001-2005 by Joshua Technology, Inc.

1.4 WARRANTY INFORMATION

Arcade Legends is warranted against manufacturing defects for 90 days. After that we
will provide free telephone support. If at some point you require warranty service,
contact Chicago Gaming at [phone]. Ask for technical support.

TM

is used under license from Joshua Technology, Inc. Joshua

2. GAME SETUP

2.1 PRE-GAME INSTALLATION

Remove the game from the shipping container. Included with the game; is an envelope
containing the game keys, SYSTEM INSTALL CD, and this manual. Connect the wall
cord to a grounded (3-terminal) AC wall outlet. The following precautions should be
followed when installing the game:

• Avoid rough handling of the game; the picture tube is fragile.

• Install the game on a level surface.

• Avoid installing the game where it will receive excessive sunlight or heat,

to protect the game from rising internal temperatures.

• Do not install in a damp or dusty location.

• For a short time after connecting the power to the game, the picture may

be temporarily distorted.

The monitor’s purity is affected by the Earth’s magnetic field, causing a variation

of color. By turning the game on for 10 or 15 seconds and then off for 20 or 30 minutes
the automatic degaussing circuit applies a degaussing field around the edges of the
monitor. Doing this a number of times will correct the problem.

Another way to correct the problem is to purchase a degaussing coil or bulk tape

eraser at any electronics store. This will help to immediately demagnetize the video tube.
Caution must be used with a degaussing coil so that the magnetic field of the degaussing
coil is not allowed to become too intense at any one place on the picture tube, thereby
causing a localized color distortion.

If you move the game to another location after degaussing the distortion may

reappear. Refer to the video monitor manual for details.

The game monitor is properly adjusted before shipping. If there are any

adjustments necessary, refer to the video monitor manual. This manual contains all the
manufacturer recommendations for adjusting the video monitor.

Primary monitor adjustments are located behind the faux coin door.

2.2 ON / OFF SWITCH

The On/Off switch is located on the top of the machine in the back right

hand corner.

3. ARCADE SETUP MENU

Press the test button which is located behind the faux coin-door to access the

ARCADE SETUP MENU. The test button can be accessed without opening the faux
coin-door by pressing the coin-return button. If you want to limit access to the TEST
button, open the faux coin door and control panel, loosen the nut on the back of the TEST
button and move it to the left. Be sure to retighten the nut. To choose a menu option,
move the arrow or cursor so that the desired option is highlighted. This is done using the
player one joystick. When the desired option is highlighted, press player one button one
to select it and enter that submenu. In this manual the term “highlight” will mean to
position the arrow over the desired option. The term “select” will mean to press player
one, button one. The exit option on all menus will always go back to a previous menu.

After you press the test button, you will see the ARCADE SETUP menu which will
allow you to access the following:

3.1 LANGUAGE

Move the joystick to the left and right to access the following languages: English,
French, German, Swedish, Italian, and Spanish.

3.2 SOUND VOLUME

This menu option allows you to set the Sound Volume level between one and ten. To
adjust, highlight Sound Volume on the ARCADE SETUP MENU (Fig. 3-1) and move
the joystick to the left or right. Sound for the entire system can be turned off by setting
the value to ZERO.

3.3 GAME CONFIGURATION

This menu allows you to choose which games you wish to display on the main interface
selection screen and to set the dipswitch settings for each game.

Use the following system for navigating this setup menu:

Joystick (Player One):

• Up/down moves left column cursor up or down

• Left/right pages left column cursor up or down

Buttons (Player One):

• Button 1 executes choice or disables/enables a game

• Button 6 enters dipswitch menu for highlighted game

Each installed game comes set to its original factory default dipswitch settings. To
change a game’s settings highlight it and press button six. This will enter you into that
game’s unique dipswitch menu. To change a dipswitch setting, highlight it and move the
joystick either left or right to adjust the setting. To restore the settings to factory defaults,
highlight factory defaults and select.