Chicago Faucet Zire, PDA103 Installation Manual

2100 South Clearwater Drive

Des Plaines, IL 60018

P: 847/803-5000

F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com

*

All products sold are fully tested and defect-free reconditioned units.
WARRANTY: A 30 day limited warranty against material manufacturing defects applies.
See www.chicagofaucets.com for limited warranty details and restrictions.
Palm and Zire are trademarked by Palm Inc. and are not affiliated with The Chicago Faucet Company.

TAG-PDA001 07/09

© 2009 The Chicago Faucet Company. Product specifications subject to change without notice.

Thank you for choosing Chicago Faucets. The device* you have purchased together with Chicago Faucets Commander™Software
will allow you to effortlessly change settings on your Chicago Faucets electronic products.

Before use make sure that you install 2 new AAA batteries (Models m100 & m105), or charge the device (Models Zire™ & Zire™ 31)

m100 & m105 Zire Zire 31

Press tab
to open
battery door.

Connecting to PC

Depending on the device you have purchased, you will have to use either a serial or USB connection from the device to the PC.

m100

m105

Zire Zire 31

Models m100 and m105 use a serial port connection and Zire and Zire 31 use a USB connection. There is an adapter that you could purchase
on the market that will allow a serial connection to be converted to a USB connection.

Installing the desktop application is necessary in order to establish communication between your PC and the device. Install the
software from the CD provided with your device. You need to ensure that after installation, your device can be synchronized to the
PC with the HotSync function.

For any additional assistance in setting up your device, go to the product support section at www.palm.com
For m100 and m105:

www.palm.com/us/support/handbooks/m100_ug.pdf

For Zire: www.palm.com/us/support/handbooks/zire_ug.pdf
For Zire 31: www.palm.com/us/support/handbooks/zire31/Zire31_UG_ENG.pdf

Downloading Geberit Commander™Software

Once your device has been set up, you are ready to download the Commander software needed to communicate with Chicago
Faucets electronic fittings. The software is free of charge and can be obtained at www.chicagofaucet.com/commander. From the
website, choose handheld application and follow the instructions on the screen.

Once the Geberit Commander has been downloaded to your PC, ensure that you install it on your Palm desktop application and
hotsync it to your device. More help on this can be found in the complete user guide, available from the above Palm web addresses.
NOTICE: The software can be much easier beamed from a device that already has the software.

After transferring the Commander software onto your device, the following icon is on your device:

Tap on the icon, and you are able start experiencing the quickest and easiest way to adjust your electronic fittings.
The Commander main menu will guide you on how to use the software:

Quick Start Guide

Geberit Commander™Software Solutions