Chicago Faucet W4D Installation Manual

Workboard Faucets

Position faucet base and gasket. Optional accessory for low prole wall

1

3a 6

mounted installation

520-001KJKABRBF
Low Prole 90º Elbow Pair,
1/2˝ NPSM x 1/2˝ NPSM.

2

For typical applications,

up to 14 Ga (.080˝

washers are required.

For installation with
deck thickness above

14 Ga (.080˝ ),

only one washer is
required.

), two

(not supplied)

Connect to water supply.Attach washers and locking nuts and tighten.

4

2˝

Minimum

Clearance

Follow instructions included with spout assembly.
Attach spout and tighten.

Remove outlet, ush lines for at least 2 minutes,

7

and reinstall outlet.

Attach water inlet hoses and tighten.

3

Can accommodate
bull nose risers.

Attach handles and color-coded index buttons.

5

For deck ttings,
handles rotate
clockwise to open.

For wall ttings,

handles rotate
counterclockwise
to open.

Closed Position

Chicago Faucets Limited Warranty Care and Maintenance

Installation Instructions for

Workboard Faucets

W4D, W8D, W4W, W8W Series

Please Note Before Installing

Installation should be in accordance with local plumbing
codes. Flush all pipes thoroughly before installation.

Limited Warranty

The CHICAGO FAUCET COMPANY (“Chicago Faucets”)

extends to the original consumer the following warranties

for Genuine Chicago Faucets manufactured products and

components, or other components under the Chicago

Faucets Warranties, (collectively, the “Products”).

Lifetime Faucet Warranty

The “Faucet”, dened as any metal cast, forged, stamped,

or formed portion of the Product, not including electronic
or moving parts or water restricting components, or
other components covered under the Chicago Faucets
warranties, is warranted against defects for the life
of the product.

Five Year Cartridge Warranty

The “Cartridge”, dened as the metal portion of any

Product typically referred to by the product numbers

containing 1-099X, 1-100X, 217-X, 377-X, or 274-X,

excluding any rubber or plastic components, is warranted

against manufacturing defects for a period of ve (5) years

from the date of Product purchase.

All Chicago Faucets ttings are designed and engineered

to meet or exceed industry performance standards. Care

should be taken when cleaning this product. Do not use

abrasive cleaners, chemicals, or solvents as they can result

in surface damage. Use mild soap with warm water for
cleaning and protecting Chicago Faucets ttings.

Additional Documentation

Please visit chicagofaucets.com for a submittal drawing,
replacement parts list, or installation instructions.

One Year Finish Warranty

The nish of the Product is warranted against
manufacturing defects for a period of one (1) year from the

date of Product purchase.

For complete Terms and Conditions, including warranty

information, please visit chicagofaucets.com/customers.

The Chicago Faucet Company

2100 South Clearwater Drive
Des Plaines, IL 60018
Phone: [phone]
Fax: [phone]
Technical: 800/832-8783

www.chicagofaucets.com

© 2012 Chicago Faucet Company TAG-520 09/12