MECHANICAL FAUCETS
SH-PB1-02-100
Tub and Showers
Product Type
___________________________________________________
Wall Mounted Pressure Balancing Pressure Balancing Tub
and Shower Valve with Shower Head and Diverter Tub Spout
Features & Specifications
___________________________________________________
• Pressure Balancing
• Pressure Balancing Tub and Shower Valve Only
• 5-3/8" Tub Spout with Diverter
• 2.5 GPM Max. Flow Rate @ 80 PSI Shower Head with Ball
Joint
• Pressure Balance Control Cartridge
• 1/2" Nominal Copper and 1/2" NPT Hot and Cold Supply
Inlets and Outlets
• Includes Showerhead Arm and Wall Flange
• Shower Valve Cycles from Cold to Hot
• Embossed and Color Coded Idexing on Wall Plate
• Integral Service Stops with Checks to Prevent Cross Flow
• CFNow! Item Ships in 5 Days
Job Name ________________________________________________
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• ASSE 1016
Last Revision: 03/24/2014 • Date Printed: 09/10/2014 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
SH-PB1-02-100
Tub and Showers
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. SH-PB1-02-100, Wall Mounted Pressure Balancing Pressure Balancing Tub and Shower Valve with Shower Head and
Diverter Tub Spout, Chrome Plated solid brass construction. Pressure Balancing Tub and Shower Valve Only. 5-3/8" Center to Center Tub
Spout with Diverter. 2.5 GPM Max. Flow Rate @ 80 PSI Shower Head with Ball Joint. Pressure Balance Control Cartridge. 1/2" Nominal
Copper and 1/2" NPT Hot and Cold Supply Inlets and Outlets. Includes Showerhead Arm and Wall Flange. Shower Valve Cycles from Cold to
Hot. Embossed and Color Coded Idexing on Wall Plate. Integral Service Stops with Checks to Prevent Cross Flow. This product is tested and
certified to industry standards: ASME A112.18.1/CSA B125.1, and ASSE 1016.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 03/24/2014 • Date Printed: 09/10/2014 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454