Chicago Faucet 994-ABCP User Manual

MECHANICAL FAUCETS
994-ABCP

Stops and Supplies

Product Type

___________________________________________________

Angle Stop Fitting

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• Stops with 3/8" Inlet

• 2-1/4" Tee Handle

• Slow Compression Operating Cartridge

• 3/8" NPT Female Thread Inlet

• 1/2" O.D. Female Compression Outlet

• ECAST® design provides durable brass construction with
total lead content equal to or less than 0.25% by weighted
average

Performance Specification

___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140ºF

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Codes & Standards

___________________________________________________

• ASME A112.18.1/CSA B125.1

ECAST products are intended for installation where state laws and local
codes mandate lead content levels or in any location where lead content
is a concern.

Last Revision: 02/28/2013 • Date Printed: 07/12/2013 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

994-ABCP

Stops and Supplies

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 994-ABCP, Angle Stop Fitting, Chrome Plated solid brass construction. 2-1/4" Metal Tee handle(s) with Tapered Square.
Slow compression rebuildable cartridge, opens and closes 360° for fine adjustment, closes with water pressure, features square tapered stem.
3/8" NPT Female Thread Inlet. 1/2" O.D. Female Compression Outlet. ECAST® construction with less than 0.25% lead content by weighted
average. .

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 02/28/2013 • Date Printed: 07/12/2013 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454