Chicago Faucet 942 User Manual

MECHANICAL FAUCETS
942-CP

Water Faucets

Product Type

___________________________________________________

Wall Mounted 8" Body, Adjustable Arms 7 1/4" - 8 3/4" Hot
and Cold Water Inlet Faucet

Features & Specifications

___________________________________________________

• 8" Body, Adjustable Arms 7 1/4" - 8 3/4"

• 5 1/4" Rigid / Swing Gooseneck Spout

• Full Flow Nozzle

• 2 1/2" Cross Handle

• Slow Compression Operating Cartridge

• 3/8" Offset Inlet Supply Arm with Integral Check with 1/2"
NPT Female Thread Inlet

• 2 5/16" Diameter Slip Flange

Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Performance Specification

___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140ºF

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards

___________________________________________________

• ASME A112.18.1/CSA B125.1

Date _____________________________________________________

Last Revision: 12/28/2011 • Date Printed: 04/3/2012 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

942-CP

Water Faucets

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 942-CP, Wall Mounted 8" Body, Adjustable Arms 7 1/4" - 8 3/4" Hot and Cold Water Inlet Faucet, polished chrome plated
solid brass construction 5 1/4" Center to Center Rigid / Swing Gooseneck Spout. Full Flow Laboratory Serrated Nozzle. 2 1/2" Metal Cross
handle(s) with Eight Point Tapered Broach and CW and HW Buttons. Slow compression rebuildable cartridge, opens and closes 360° for fine
adjustment, closes with water pressure, features square tapered stem. 3/8" Offset Inlet Supply Arm with Integral Check with 1/2" NPT Female
Thread Inlet. 2 5/16" Diameter Slip Flange. Mounting hardware included.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 12/28/2011 • Date Printed: 04/3/2012 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454