Chicago Faucet 937-E17CP User Manual

MECHANICAL FAUCETS
937-E17CP

Water Valves

Product Type

___________________________________________________

Laboratory Water Valves

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• Single Hole

• Full Flow Outlet

• 2-1/2" Cross Handle

• Slow Compression Operating Cartridge

• 3/8" - 18 NPT Male Thread Inlet

Performance Specification

___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140 ºF

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Last Revision: 09/30/2013 • Date Printed: 09/4/2014 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

937-E17CP

Water Valves

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 937-E17CP, Laboratory Water Valves, Chrome Plated solid brass construction. Full Flow Aspirator Pump Serrated Outlet.
2-1/2" Metal Cross handle(s) with Eight Point Tapered Broach and CW Button. Slow compression rebuildable cartridge, opens and closes 360°
for fine adjustment, closes with water pressure, features square tapered stem. 3/8" - 18 NPT Male Thread Inlet. .

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 09/30/2013 • Date Printed: 09/4/2014 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454