Chicago Faucet 937-CHLEOAGV User Manual

MECHANICAL FAUCETS
937-CHLEOAGV

Needle Valves

Product Type

___________________________________________________

Panel Mounted Single Needle Valves Needle Valve

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• Single Needle Valves

• 2-1/2" Cross Handle

• Needle Valve Compression Operating Cartridge

• 3/8" - 18 NPT Male Thread Inlet

• May Be Used with Most Laboratory Gases

• 937 Valve is Certified for Gas Service per ANSI
Z21.15b-2006/CSA 9.1b-2006 by the Canadian Standards
Association

Performance Specification

___________________________________________________

• Rated Operating Pressure: 0-0.5 PSI

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Last Revision: 03/22/2013 • Date Printed: 07/10/2013 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

937-CHLEOAGV

Needle Valves

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 937-CHLEOAGV, Panel Mounted Single Needle Valves Needle Valve, Chrome Plated solid brass construction. 2-1/2"
Metal Cross handle(s) with Eight Point Tapered Broach and AIR, GAS or VAC Button. 3/8" - 18 NPT Male Thread Inlet. May Be Used with Most
Laboratory Gases. 937 Valve is Certified for Gas Service per ANSI Z21.15b-2006/CSA 9.1b-2006 by the Canadian Standards Association.
Mounting hardware included.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 03/22/2013 • Date Printed: 07/10/2013 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454