Chicago Faucet 929-E22E7 User Manual
MECHANICAL FAUCETS
929-E22E7CP
Water Faucets
Product Type
___________________________________________________
Deck Mounted Single Hole Hot and Cold Water Mixing
Faucet
Features & Specifications
___________________________________________________
• Single Hole
• 5 1/4" Rigid / Swing Gooseneck Spout
• Full Flow
• 2 1/2" Cross Handle
• Slow Compression Operating Cartridge
• 3/8" O.D. Copper Supply Tubes
• Dual Check Vacuum Breakers for Laboratory Faucets are
used for noncontinuous pressure, health hazard, applications
and are backsiphonage backflow preventers. This series is
specially made for laboratory faucets where portable hoses
can be attached and prevent the flow of contaminated water
back into the potable water supply. These vacuum breakers
can be installed on new or existing faucets without plumbing
changes.
• Atmospheric Vacuum Breaker, Not Intended for Continuous
Pressure Applications
Job Name ________________________________________________
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
Last Revision: 07/25/2011 • Date Printed: 03/30/2012 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
929-E22E7CP
Water Faucets
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 929-E22E7CP, Deck Mounted Single Hole Hot and Cold Water Mixing Faucet, polished chrome plated solid brass
construction 5 1/4" Center to Center Rigid / Swing Gooseneck Spout. Full Flow Back Flow Preventer with Serrated Nozzle Nozzle. 2 1/2" Metal
Cross handle(s) with Eight Point Tapered Broach and CW and HW Buttons. Slow compression rebuildable cartridge, opens and closes 360° for
fine adjustment, closes with water pressure, features square tapered stem. 3/8" O.D. Copper Supply Tubes. Dual Check Vacuum Breakers for
Laboratory Faucets are used for noncontinuous pressure, health hazard, applications and are backsiphonage backflow preventers. This series is
specially made for laboratory faucets where portable hoses can be attached and prevent the flow of contaminated water back into the potable
water supply. These vacuum breakers can be installed on new or existing faucets without plumbing changes.. Mounting hardware
includedAtmospheric Vacuum Breaker, Not Intended for Continuous Pressure Applications. This product is tested and certified to industry
standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 07/25/2011 • Date Printed: 03/30/2012 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...