Chicago Faucet 802-LESSHDLABCP Specifications
PRODUCT TYPE
Deck mounted faucet with 4" integral spout less handles
FEATURES &SPECIFICATIONS
• Polished chrome plated finish
• Solid brass construction
• ECAST design provides durable brass construction with
total lead content less than 0.25% by weighted average
• Rigid valve bodies
• 4" C-C Integral spout
• 2.2 GPM (8.3 L /min) pressure compensating aerator
outlet, catalog #E12
• Quaturn
™
quarter-turn renewable compression cartridge
that closes with water pressure with tapered square
broach to facilitate handle removal, catalog #1-100XT
and #1-099XT
• 1⁄2" NPSM supply inlets with coupling nuts for 3/8" or
1⁄2" flexible risers
• Mounting hardware included
PERFORMANCE SPECIFICATION
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140° F
WARRANTY
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
COMPLIANT TO
• California Plumbing Law (AB1953)
• NSF 61, Sec. 9 • ASME A112.18.1
• CSA AB1953 • ADA
802-LESSHDLABCP
Deck Mounted - 4" Centers
MANUAL
4/08
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
U
.
S
.
G
R
E
E
N
B
U
I
L
D
I
N
G
C
O
U
N
C
I
L
M
E
M
B
E
R
Job Name ____________________________________________________
Item Number _________________________________________________
Section/Tag __________________________________________________
Model Specified ______________________________________________
Architect _____________________________________________________
Engineer _____________________________________________________
Contractor ___________________________________________________
❏ Submitted as Shown ❏ Submitted with Variations
Date _________________________________________________________
802-LESSHDLABCP
Deck Mounted - 4" Centers
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No. 802-LESSHDLABCP, Polished chrome plated solid cast brass body construction with integral 4" C-C
spout and integral inlet shanks on 4" centers. 2.2 GPM pressure compensating aerator outlet. Quaturn
™
quarter-turn renewable
compression cartridge designed to close with water pressure with square tapered broach feature to help facilitate handle
removal. Inlet shanks contain standard 1/2" NPSM threaded inlets with coupling nuts for connection to 3/8" or 1/2" standard
flexible risers. Mounting hardware included. This product meets ADA requirements and is tested and certified to industry
standards: ASME A112.18.1, NSF 61 Sec. 9, CSA AB1953 and California Lead Plumbing Law (AB1953).
"
[152mm]
6
" C-C
[102mm]
4
"
[60mm]
2-3/8
1-1/2 " [38mm]
MAX. WARE
THICKNESS
1/2" NPSM COUPLING
NUT FOR 3/8" OR 1/2"
FLEXIBLE RISER.
FRONT VIEW
"
[70mm]
2-3/4
"
[51mm]
2
15/16
"
DIA.
[24mm]
"
DIA.
[44mm]
1-3/4
"
[102mm]
4
"
[41mm]
1-5/8
SIDE VIEW
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
OPERATION AND MAINTENANCE
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove
spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning this product. Do not
use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and
protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair
parts documents that are located at www.chicagofaucets.com
.
4/09 Product specifications subject to change without notice.
ECAST,™from Chicago Faucets, is the line of durable, high-quality brass faucets and fixtures that are designed and manufactured with
less than one quarter of one percent (0.25%) total lead content by weighted average. These products are intended for installation
where state laws and local codes mandate lead content levels or in any location where lead content is a concern.
Loading...