Chicago Faucet 786 User Manual
Undermount Faucets
With Adjustable Centers
Adjustability has never been this easy.
Introducing the new Chicago Faucets undermount faucet with adjustable centers. Chicago Faucets
undermount faucets are better than ever before and more installer friendly than just about any other commercial
faucet on the market. Flexible hoses allow for almost unlimited handle placement, while the pre-assembled parts
and individual testing help deliver durable performance and an easier installation. Plus, with a lifetime warranty on
the body and interchangeable handles, spouts, outlets, and cartridges – you get a faucet that not only lasts, but
one that’s easy to upgrade.
■
Flexible hoses provide countless options for handle placement
■
Fewer parts and pre-assembled components for a faster installation that reduces
labor costs for installation and ongoing maintenance
■
Fully threaded valve body adjusts to almost any deck thickness
■
Interchangeable with the same handles, spouts, cartridges, and outlets you use on
your current Chicago Faucets to provide unsurpassed flexibility
Choose the Right Product for Your Application
404 786
– 3-hole installation
– Lavatory applications
– Adjustable centers - range 6˝ - 26˝
– Below deck spout connection
– Cartridge technologies available: ceramic,
compression, MVP metering
– Spouts: cast brass 404 spout
– Handles: all except NAIAD
– Outlets: 13/16˝-27 male
– 2-hole installation
– Lavatory applications
– Adjustable centers - range 3˝ - 13˝
– Cold water only
– Below deck spout connection
– Cartridge technologies available: ceramic,
compression, metering
– Spouts: cast brass 404 spout
– Handles: all except NAIAD
– Outlets: 13/16˝-27 male
– 3-hole installation
– Kitchen/lavatory applications
– Adjustable centers - range 6˝ - 26˝
– Below deck spout connection
– Cartridge technologies available:
– Spouts: all gooseneck and
– Handles: all except NAIAD
– Outlets: 13/16˝-27 male
ceramic, compression, MVP metering
“L” type spouts
Undermount Faucets with
Adjustable Centers
Unmatched adjustability with stainless
steel hoses that provide unlimited handle
placement options.
The widest range of applications
with a fully-threaded valve body that
adjusts to almost any deck thickness.
Unsurpassed interchangeability
and compatible with the Chicago
Faucets handles, spouts, outlets,
and cartridges you already use.
Meet the latest codes & standards with
ECAST
and models for CALGreen requirements.
®
faucets for lead-reduction laws
Built to last designed, manufactured, and
assembled in the USA for maximum strength
and stability.
More handle placement options than any faucet we’ve ever made.
Flexible stainless steel hoses provide almost endless options for handle placement.
■ Easy and extremely flexible installation.
■ Handle placement within 6˝ to 26˝ from the spout center.
Codes & Standards
ASME A112.18.1M CSA B125 Certified Certified to NSF/ANSI 61, Section 9 by CSA
Chicago Faucets products meet a broad range of requirements. Look for these symbols in our literature and at chicagofaucets.com:
Complies with the Buy American Act of 1993 and meets the
requirements of the Buy American provision in the American
Recovery and Reinvestment Act.
ECAST faucets are manufactured with .25% or less total lead
content by weighted average to meet the requirements of
state laws and local codes regarding lead content.
Meets the California Green Building Standards Code.
Contains 10% post-consumer recycled paper
Complies with the Americans with Disabilities Act (ADA).
The Chicago Faucet Company
www.chicagofaucets.com
CF2005 06/11© 2011 The Chicago Faucet Company. Product specifications subject to change without notice.
Loading...