MECHANICAL FAUCETS
782-ISE27CP
Manual Faucets
Product Type
___________________________________________________
Wall Mounted 8" Fixed Centers Concealed Hot and Cold Water Sink
Faucet with Pail Hook
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• 8" Fixed Centers
• Full Flow In-Line Vacuum Breaker with Hose Thread Outlet
• 3" Cross Handle
• Slow Compression Operating Cartridge
• Stop Valve
• 1/2" NPT Female Thread Inlets
• Hose connection vacuum breakers specially made to permit the
attachment of portable hoses to hose thread faucets. Designed to
prevent the flow of contaminated water back into the potable water
supply, these devices require no plumbing changes, and screw directly
onto a sill cock. Not Intended for Continuous Pressure Applications
• 5 3/4" Center to Center Integral Cast Spout with Pail Hook and Wall
Brace
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
Last Revision: 02/15/2016 • Date Printed: 07/24/2017 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
782-ISE27CP
Manual Faucets
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 782-ISE27CP, Sink Faucet for hot and cold water, concealed wall-mount for 8" fixed centers, chrome plated. Integral, cast
brass spout with pail hook and wall brace, 5-3/4" center-to-center. Full-flow, in-line vacuum breaker with hose thread outlet. 3" metal cross handles
with eight-point, tapered broach and secured blue and red index buttons. Slow compression rebuildable cartridge, opens and closes 360° for fine
adjustment, closes with water pressure, features square, tapered stem. Stop Valve. 1/2" NPT female thread inlets. Hose connection vacuum breakers
specially made to permit the attachment of portable hoses to hose thread faucets. Designed to prevent the flow of contaminated water back into the
potable water supply, these devices require no plumbing changes, and screw directly onto a sill cock. NOTE: not intended for continuous pressure
applications. This product is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by
CSA.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or
flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners,
chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet
products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at
www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete
range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or
1.847.803.5000 Option 1 for installation or other technical assistance.
Last Revision: 02/15/2016 • Date Printed: 07/24/2017 • Product specifications subject to change without notice
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454