Chicago Faucet 782-CP User Manual

MECHANICAL FAUCETS
782-CP

Manual Faucets

Product Type
___________________________________________________

Wall Mounted 8" Fixed Centers Concealed Hot and Cold Water Sink
Faucet with Pail Hook

Job Name ________________________________________________

Features & Specifications
___________________________________________________

• 8" Fixed Centers

• 3" Cross Handle

• Slow Compression Operating Cartridge

• 1/2" NPT Female Thread Inlets

• 3/4" Male Hose Thread Outlet

• 5 3/4" Center to Center Integral Cast Spout with Pail Hook and Wall
Brace

Performance Specification
___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140ºF

Warranty
___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards
___________________________________________________

• ASME A112.18.1/CSA B125.1

• Certified to NSF/ANSI 61, Section 9 by CSA

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Last Revision: 02/15/2016 • Date Printed: 07/24/2017 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

782-CP

Manual Faucets

Architect/Engineer Specification
________________________________________________________________________________________________________

Chicago Faucets No. 782-CP, Sink Faucet for hot and cold water, concealed wall-mount for 8" fixed centers, chrome plated. Integral, cast brass
spout with pail hook and wall brace, 5-3/4" center-to-center. 3" metal cross handles with eight-point, tapered broach and secured blue and red index
buttons. Slow compression rebuildable cartridge, opens and closes 360° for fine adjustment, closes with water pressure, features square, tapered
stem. 1/2" NPT female thread inlets. 3/4" male hose thread outlet. This product is tested and certified to industry standards: ASME A112.18.1/CSA
B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.

Operation and Maintenance
________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or
flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners,
chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet
products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at

www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete
range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or

1.847.803.5000 Option 1 for installation or other technical assistance.

Last Revision: 02/15/2016 • Date Printed: 07/24/2017 • Product specifications subject to change without notice

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454