Chicago Faucet 732-OHVBCP Specifications

MANUAL FAUCETS
732-OHVBCP

Angle Urinal Metering Fitting

Product Type

___________________________________________________

Angle Urinal Metering Fitting

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• 3/4" O.D. x 9 7/8" Vacuum Breaker Tail Piece

• Long Bonnet Non-Sag Oscillating Handle

• NAIAD™ Metering Adjustable Self Closing Cartridge

• 1/2" NPT Female Thread Inlet

• Slip Wall Flange

• Atmospheric Vacuum Breaker, Not Intended for Continuous
Pressure Applications

Performance Specification

___________________________________________________

• Rating Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140°F

Compliant To

___________________________________________________

• ASME A112.18.1M

• CSA B125.1

• ADA ANSI/ICC A117.1

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

1/11 Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

732-OHVBCP

Angle Urinal Metering Fitting

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 732-OHVBCP, polished chrome plated solid brass body. Long bonnet non-sag oscillating handle. NAIAD™
adjustable slo-closing cartridge. 1/2" NPT female inlet and 3/4" OD x 9 7/8" vacuum breaker tailpiece. Escutcheon deck assembly
and loose wall flange. This product is tested and certified to industry standards: ASME A112.18.1 and CSA B125.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

1/11 Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454