Chicago Faucet 631-L12E35AB User Manual

MECHANICAL FAUCETS
631-L12E35ABCP

Manual Faucets

Product Type
___________________________________________________

Wall Mounted 8" Body, Adjustable Arms 7-1/4" - 8-3/4" Hot and Cold
Water Sink Faucet

Job Name ________________________________________________

Features & Specifications
___________________________________________________

• 8" Body, Adjustable Arms 7-1/4" - 8-3/4"

• 12" L Type Swing Spout

• 1.5 GPM (5.7 L/min) Aerator

• 4" Vandal Proof Wristblade Handle

• Quaturn Compression Operating Cartridge

• 3/8" Offset Inlet Supply Arm with 1/2" NPT Female Thread Inlet

• 2 5/16" Diameter Slip Flange

• ECAST® design provides durable construction with total lead content
equal to or less than 0.25% by weighted average

Performance Specification
___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140ºF

Warranty
___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards
___________________________________________________

• ASME A112.18.1/CSA B125.1

• Certified to NSF/ANSI 61, Section 9 by CSA

• ADA ANSI/ICC A117.1

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

ECAST products are intended for installation where state laws and local
codes mandate lead content levels or in any location where lead content
is a concern.

Last Revision: 04/28/2017 • Date Printed: 07/20/2017 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

631-L12E35ABCP

Manual Faucets

Architect/Engineer Specification
________________________________________________________________________________________________________

Operation and Maintenance
________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or
flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners,
chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet
products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at

www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete
range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or

1.847.803.5000 Option 1 for installation or other technical assistance.

Last Revision: 04/28/2017 • Date Printed: 07/20/2017 • Product specifications subject to change without notice

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454