Chicago Faucet 626-L9E29ABCP User Manual
MECHANICAL FAUCETS
626-L9E29ABCP
Remote Spouts and Valves
Product Type
___________________________________________________
Remote Swing Spout
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• Deck Mount
• 9-1/2" L Type Swing Spout
• 2.2 GPM (8.3 L/min) Non-Aerating Outlet
• 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or 1/2"
Flexible Riser
• ECAST® design provides durable brass construction with
total lead content equal to or less than 0.25% by weighted
average
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
ECAST products are intended for installation where state laws and local
codes mandate lead content levels or in any location where lead content
is a concern.
Last Revision: 06/14/2013 • Date Printed: 07/11/2013 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
626-L9E29ABCP
Remote Spouts and Valves
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 626-L9E29ABCP, Remote Swing Spout, Chrome Plated solid brass construction. 9-1/2" Center to Center L Type Swing
Spout. 2.2 GPM (8.3 L/min) Pressure Compensating Laminar Flow Non-Aerating Outlet. 1/2" NPSM Supply Inlets and Coupling Nut for 3/8" or
1/2" Flexible Riser. ECAST® construction with less than 0.25% lead content by weighted average. This product is tested and certified to
industry standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 06/14/2013 • Date Printed: 07/11/2013 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...