Chicago Faucet 626-E3CP Specifications
MANUAL FAUCETS
626-E3CP
Single Inlet Remote Fitting
Product Type
___________________________________________________
Single Inlet Remote Fitting
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• 5 1/4" C-C Rigid/Swing Gooseneck Spout
• 2.2 GPM (8.3 L/min) Pressure Compensating Softflo®
Aerator
• 1/2" NPSM Supply Inlets with Coupling Nut for 3/8" or 1/2"
Flexible Riser
Performance Specification
___________________________________________________
• Rating Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140°F
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Compliant To
___________________________________________________
• ASME A112.18.1M
• CSA B125.1
• NSF 61, Section 9
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
1/11 Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
626-E3CP
Single Inlet Remote Fitting
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 626-E3CP, polished chrome plated solid brass construction. 5-1/4" C-C rigid/swing field convertible
gooseneck spout. 2.2 GPM pressure compensating aerator outlet. 1/2" NPSM threaded inlets with coupling nuts for connection to
3/8" or 1/2" standard flexible risers. Mounting hardware included. This product is tested and certified to industry standards: ASME
A112.18.1, CSA B125 and NSF 61, section 9.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
1/11 Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...