Chicago Faucet 621-CP User Manual

MANUAL FAUCETS
621-CP

Wall Mounted Institutional Shower Head

Product Type

___________________________________________________

Wall Mounted Institutional Shower Head

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• 2.0 GPM MAX Flow Rate @ 80 PSI

• 1/2" NPT Female Thread Inlet

• Vandal Resistant Mounting

• Tamper Resistant for Institutional Use

Performance Specification

___________________________________________________

• Rating Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140°F

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards

___________________________________________________

• ASME A112.18.1M

• CSA B125.1

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

2/11 Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

621-CP

Wall Mounted Institutional Shower Head

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 621-CP, polished chrome plated solid brass body. 2.0 GPM pressure @ 60 PSI. Pressure compenstating
flow control and field adjustable for 20º or 30º spray angle. Vandal-resistant mounting and spray screws. Tamper resistant
design for institutional use. 1/2" NPT female inlet. Mounting hardware included. This product is tested and certified to industry
standards: ASME A112.18.1M, and CSA B125.1.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

2/11 Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454