Chicago Faucet 537-NF User Manual

MECHANICAL FAUCETS
537-NF

Washdown and Sill

Product Type

___________________________________________________

Wall Mounted Single Hole Hose Reels Hose Reel Assembly

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• Single Hole Hose Reels

• 2.5 GPM @ 60 PSI Spray

• 3/8" NPT Female Thread Inlet

• Retractable 35 Ft. x 3/8" I.D. Rubber Hose

Performance Specification

___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140 ºF

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards

___________________________________________________

• ASME A112.18.1/CSA B125.1

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Last Revision: 08/18/2011 • Date Printed: 04/3/2012 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

537-NF

Washdown and Sill

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 537-NF, Wall Mounted Single Hole Hose Reels Hose Reel Assembly, 2.5 GPM @ 60 PSI Hose Reel Pre-Rinse Valve
Spray. 3/8" NPT Female Thread Inlet. Retractable 35 Ft. x 3/8" I.D. Rubber Hose. Mounting hardware included.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 08/18/2011 • Date Printed: 04/3/2012 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454