MECHANICAL FAUCETS
510-SSVBABCP
Pre-Rinse Fittings
PRELIMINARY DRAFT
Product Type
___________________________________________________
Deck Mounted 8" Fixed Centers Pre-Rinse Fitting
Features & Specifications
___________________________________________________
• 8" Fixed Centers
• 1.0 GPM @ 60 PSI Spray Valve
• 2-3/8" Lever Handle
• Quaturn Compression Operating Cartridge
• Angle 2-1/2" Inlet Supply Arm with 1/2" NPT Female
Thread Inlet
• 23" Riser with Spring Guide
• 44" Flexible Stainless Steel Hose with Insulated Handle
• E23JKCP In-line back flow preventer to prevent the flow of
contaminated water back into the potable water supply
• Pipe Strap and Hook Assembly
• ECAST® design provides durable brass construction with
total lead content equal to or less than 0.25% by weighted
average
Job Name ________________________________________________
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
• California Health and Safety Code 116875 (AB1953-2006)
• Vermont Bill S.152
• NSF/ANSI 372 Low Lead Content
ECAST products are intended for installation where state laws and local
codes mandate lead content levels or in any location where lead content
is a concern.
Last Revision: 06/06/2013 • Date Printed: 07/12/2013 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
510-SSVBABCP
Pre-Rinse Fittings
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 510-SSVBABCP, Deck Mounted 8" Fixed Centers Pre-Rinse Fitting, Chrome Plated solid brass construction. 1.0 GPM @
60 PSI Water Conserving Pre-Rinse Spray Valve. 2-3/8" Metal Lever handle(s) with Eight Point Tapered Broach and Secured Blue and Red
Buttons. Quaturn™ rebuildable compression cartridge, opens and closes 90°, closes with water pressure, features square tapered stem. Angle
2-1/2" Inlet Supply Arm with 1/2" NPT Female Thread Inlet. 23" Riser with Spring Guide. 44" Flexible Stainless Steel Hose with Insulated Handle.
E23JKCP In-line back flow preventer to prevent the flow of contaminated water back into the potable water supply. Pipe Strap and Hook
Assembly. ECAST® construction with less than 0.25% lead content by weighted average. This product is tested and certified to industry
standards: ASME A112.18.1/CSA B125.1, Certified to NSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875
(AB1953-2006), Vermont Bill S.152, and NSF/ANSI 372 Low Lead Content.
PRELIMINARY DRAFT
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 06/06/2013 • Date Printed: 07/12/2013 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...