Chicago Faucet 420 User Manual
MANUAL FAUCETS
420-CP
Lavatory Sink Faucet
Product Type
___________________________________________________
Lavatory Sink Faucet
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• 4 5/8" C-C Integral Cast Brass Spout
• 1.5 GPM (5.7 L/min) Pressure Compensating Laminar Flow
Outlet
• 4 1/4" Metal Lever Handle with Red and Blue Service
Button
• Ceramic Disc Operating Cartridge with Temperature Limit
Stop
• 1/2" NPSM Supply Inlets
Performance Specification
___________________________________________________
• Rating Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140°F
Warranty
___________________________________________________
• 5-Year Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Compliant To
___________________________________________________
• ASME A112.18.1M
• CSA B125.1
• ADA ANSI/ICC A117.1
1/11 Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
420-CP
Lavatory Sink Faucet
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 420-CP, polished chrome plated solid brass construction with integral shanks. 4-5/8" C-C integral spout. 1.5
GPM pressure compensating laminar flow outlet. Metal lever handle. Ceramic mixing cartridge with temperature limit stop and
volume control. 4" Center to center valve body with 1/2" NPSM threaded inlets. Mounting hardware and deck gasket included for
standard lavatory installations. This product meets ADA requirements and is tested and certified to industry standards: ASME
A112.18.1, NSF 61 Sec. 9, and CSA B125.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
1/11 Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...