Chicago Faucet 3512-E2805AB User Manual
MECHANICAL FAUCETS
3512-E2805AB
Manual Faucets
Product Type
___________________________________________________
Deck Mounted Single Hole Hot and Cold Water Mixing Sink Faucet
Features & Specifications
___________________________________________________
• Single Hole
• 0.5 GPM (1.9 L/min) Vandal Proof Non-Aerating Spray
• Ceramic 1/4 Turn Operating Cartridge
• Dual Supply for Hot and Cold Water Service
• Stainless Steel Hoses Included
• User Adjustable Temperature Control Mixer with Hot Water Adjustment
Limit Stop (up to 85% / 95% of Available Hot Water)
• 4" Center to Center Integral Cast Brass Spout
• ECAST® design provides durable construction with total lead content
equal to or less than 0.25% by weighted average
Job Name ________________________________________________
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
• California Health and Safety Code 116875 (AB1953-2006)
• Vermont Bill S.152
• NSF/ANSI 372 Low Lead Content
• ADA ANSI/ICC A117.1
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
ECAST products are intended for installation where state laws and local
codes mandate lead content levels or in any location where lead content
is a concern.
Last Revision: 05/31/2013 • Date Printed: 07/17/2017 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
3512-E2805AB
Manual Faucets
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 3512-E2805AB, Sink Faucet for hot and cold water, single-hole deck mount, chrome plated. Integral, cast brass spout, 4"
center-to-center. 0.5 GPM (1.9 L/min) vandal-proof, pressure compensating, Econo-Flo, non-aerating spray. Ceramic quarter-turn cartridge, features
square, tapered stem. Dual supply for hot and cold water service. Stainless steel hoses included. User-adjustable temperature control mixer with hot
water adjustment limit stop (up to 85%/95% of available hot water). ECAST® construction with less than 0.25% lead content by weighted average.
This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, Certified to
NSF/ANSI 61, Section 9 by CSA, California Health and Safety Code 116875 (AB1953-2006), Vermont Bill S.152, and NSF/ANSI 372 Low Lead
Content.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove spout outlet or
flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the product. Do not use abrasive cleaners,
chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and protecting the life of Chicago Faucet
products. For specific operation and maintenance refer to the installation instructions and repair parts documents that are located at
www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering a complete
range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities. Call 1.800.TECTRUE or
1.847.803.5000 Option 1 for installation or other technical assistance.
Last Revision: 05/31/2013 • Date Printed: 07/17/2017 • Product specifications subject to change without notice
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...