Chicago Faucet 350-GN8AE29-317 User Manual

MECHANICAL FAUCETS
350-GN8AE29-317CP

Sink Faucets

Product Type

___________________________________________________

Deck Mounted Single Hole Single Supply Sink Faucet

Job Name ________________________________________________

Features & Specifications

___________________________________________________

• Single Hole

• 8" Rigid / Swing Gooseneck Spout

• 2.2 GPM (8.3 L/min) Non-Aerating Outlet

• 4" Wristblade Handle

• Quaturn Compression Operating Cartridge

• 1/2" NPSM Supply Inlet with Coupling Nut for 3/8" or 1/2"
Flexible Riser

Performance Specification

___________________________________________________

• Rated Operating Pressure: 20-125 PSI

• Rated Operating Temperature: 40-140ºF

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards

___________________________________________________

• ASME A112.18.1/CSA B125.1

• Certified to NSF/ANSI 61, Section 9 by CSA

• ADA ANSI/ICC A117.1

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Last Revision: 11/11/2011 • Date Printed: 03/21/2012 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

350-GN8AE29-317CP

Sink Faucets

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 350-GN8AE29-317CP, Deck Mounted Single Hole Single Supply Sink Faucet , polished chrome plated solid brass
construction 8" Center to Center Rigid / Swing Gooseneck Spout. 2.2 GPM (8.3 L/min) Pressure Compensating Laminar Flow Non-Aerating
Outlet. 4" Metal Wristblade handle(s) with Sixteen Point Tapered Broach and Secured Blue Button. Quaturn™ rebuildable compression
cartridge, opens and closes 90°, closes with water pressure, features square tapered stem. 1/2" NPSM Supply Inlet with Coupling Nut for 3/8" or
1/2" Flexible Riser. Mounting hardware included This product meets ADA ANSI/ICC A117.1 requirements and is tested and certified to industry
standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 11/11/2011 • Date Printed: 03/21/2012 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454