MVP FAUCETS
333-665PRCP
Sink Faucets
Product Type
___________________________________________________
Deck Mounted Single Hole Single Supply Metering Sink
Faucet
Features & Specifications
___________________________________________________
• Single Hole
• 2.2 GPM (8.3 L/min) Aerator
• 1 3/4" Vandal Proof MVP Metering Push Handle
• MVP Metering Adjustable Cycle Time Closure Cartridge
• 1/2" NPSM Supply Inlet with Coupling Nut for 3/8" or 1/2"
Flexible Riser
• 3 3/8" Center to Center Integral Cast Brass Spout
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Job Name ________________________________________________
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
• ADA ANSI/ICC A117.1
Last Revision: 12/09/2011 • Date Printed: 03/20/2012 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
333-665PRCP
Sink Faucets
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 333-665PRCP, Deck Mounted Single Hole Single Supply Metering Sink Faucet, polished chrome plated solid brass
construction3 3/8" Center to Center Integral Cast Brass Spout. 2.2 GPM (8.3 L/min) Pressure Compensating Softflo Aerator. 1 3/4" Metal
Vandal Proof MVP Metering Push handle(s) with Blue and Red Buttons. MVP™ self-closing, auto-timed metering cartridge, adjustable run time
from 2 to 15 seconds, opens with push, 0.25 gallon/cycle. 1/2" NPSM Supply Inlet with Coupling Nut for 3/8" or 1/2" Flexible Riser. Mounting
hardware included. Secondary Control Valve: 3 3/8" Center to Center Integral Cast Brass Spout. This product meets ADA ANSI/ICC A117.1
requirements and is tested and certified to industry standards: ASME A112.18.1/CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 12/09/2011 • Date Printed: 03/20/2012 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454