Chicago Faucet 2305-613AAB User Manual
MECHANICAL FAUCETS
2305-613AABCP
Pre-Rinse Fittings
Product Type
___________________________________________________
Deck Mounted Single Hole Deck Mounted Pre-Rinse Fitting
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• Single Hole
• 1.0 GPM @ 60 PSI Spray Valve
• 2-3/4" Lever Handle
• Ceramic Volume Control and Hot Water Limit Stop
Cartridge
• Secondary Control Valve
• 9-1/2" L Type Swing Spout
• Full Flow Outlet
• Quaturn Compression Operating Cartridge
• 3/8" Compression Flexible Stainless Steel Supply Hoses
• 23" Riser with Spring Guide
• 44" Flexible Stainless Steel Hose with Insulated Handle
• Pipe Strap and Hook Assembly
• ECAST® design provides durable brass construction with
total lead content equal to or less than 0.25% by weighted
average
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1/CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
• California Health and Safety Code 116875 (AB1953-2006)
• Vermont Bill S.152
• NSF/ANSI 372 Low Lead Content
ECAST products are intended for installation where state laws and local
codes mandate lead content levels or in any location where lead content
is a concern.
Last Revision: 02/21/2014 • Date Printed: 09/11/2014 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
2305-613AABCP
Pre-Rinse Fittings
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 2305-613AABCP, Deck Mounted Single Hole Deck Mounted Pre-Rinse Fitting, Chrome Plated solid brass construction. 1.0
GPM @ 60 PSI Water Conserving Pre-Rinse Spray Valve. 2-3/4" Metal Lever handle(s) with Blue and Red Temperature Indicator. Ceramic
quarter turn cartridge, features square tapered stem. 3/8" Compression Flexible Stainless Steel Supply Hoses. 23" Riser with Spring Guide. 44"
Flexible Stainless Steel Hose with Insulated Handle. Pipe Strap and Hook Assembly. ECAST® construction with less than 0.25% lead content by
weighted average. Secondary Control Valve: 9-1/2" Center to Center L Type Swing Spout. Full Flow Quixtop with Single Screen Design Outlet.
Quaturn™ rebuildable compression cartridge, opens and closes 90°, closes with water pressure, features square tapered stem. This product is
tested and certified to industry standards: ASME A112.18.1/CSA B125.1, Certified to NSF/ANSI 61, Section 9 by CSA, California Health and
Safety Code 116875 (AB1953-2006), Vermont Bill S.152, and NSF/ANSI 372 Low Lead Content.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 02/21/2014 • Date Printed: 09/11/2014 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...