Chicago Faucet 1900-CP User Manual

MECHANICAL FAUCETS
1900-CP

Tub and Showers

Product Type

___________________________________________________

Wall Mounted Pressure Balancing Pressure Balancing Tub
and Shower Valve with Shower Head and Diverter Tub Spout

Features & Specifications

___________________________________________________

• Pressure Balancing

• 5 1/2" Tub Spout with Diverter

• 2.5 GPM Max. Flow Rate @ 80 PSI Shower Head with Ball
Joint

• Pressure Balance Cartridge

• 1/2" Nominal Copper Hot and Cold Supply Inlets and
Outlets

• Includes Showerhead Arm and Wall Flange

• Shower Valve Cycles from Cold to Hot

• Integral Service Stops

Job Name ________________________________________________

Item Number _____________________________________________

Section/Tag ______________________________________________

Model Specified ___________________________________________

Architect _________________________________________________

Engineer _________________________________________________

Contractor ________________________________________________

[ ] Submitted as Shown [ ] Submitted with Variations

Date _____________________________________________________

Warranty

___________________________________________________

• Lifetime Limited Faucet Warranty

• 5-Year Limited Cartridge Warranty

• 1-Year Limited Finish Warranty

Codes & Standards

___________________________________________________

• CSA B125.3

• ASSE 1016

Last Revision: 12/14/2011 • Date Printed: 03/28/2012 • Product specifications subject to change without notice

2100 South Clearwater Drive

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454

Technical: 800/TEC-TRUE

www.chicagofaucets.com

1900-CP

Tub and Showers

Architect/Engineer Specification

________________________________________________________________________________________________________

Chicago Faucets No. 1900-CP, Wall Mounted Pressure Balancing Pressure Balancing Tub and Shower Valve with Shower Head and Diverter
Tub Spout, polished chrome plated solid brass construction 5 1/2" Center to Center Tub Spout with Diverter. 2.5 GPM Max. Flow Rate @ 80
PSI Shower Head with Ball Joint. Pressure Balance Cartridge. 1/2" Nominal Copper Hot and Cold Supply Inlets and Outlets. Includes
Showerhead Arm and Wall Flange. Shower Valve Cycles from Cold to Hot. Integral Service Stops. Mounting hardware included This product is
tested and certified to industry standards: CSA B125.3, and ASSE 1016.

Operation and Maintenance

________________________________________________________________________________________________________

Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.

Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.

2100 South Clearwater Drive

Technical: 800/TEC-TRUE

www.chicagofaucets.com

Last Revision: 12/14/2011 • Date Printed: 03/28/2012 • Product specifications subject to change without notice

Des Plaines, IL
P: 847/803-5000
F: 847/803-5454