MECHANICAL FAUCETS
1332-SAM
Multiple Service Fixtures
Product Type
___________________________________________________
Deck Mounted Multiple Service Valves Combination Triple
Service Fixture
Features & Specifications
___________________________________________________
• Multiple Service Valves
• Full Flow Nozzle
• Secondary Control Valve
• Full Flow Nozzle
• 2 1/2" Cross Handle
• Slow Compression Operating Cartridge
• Two 3/8" NPT Male Thread Inlet Shank Assemblies
• May Be Used with Most Laboratory Gases
• 909 Valve is Certified for Gas Service per ANSI
Z21.15b-2006/CSA 9.1b-2006 by the Canadian Standards
Association
Job Name ________________________________________________
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 0-0.5 PSI
• Rated Operating Temperature: 40-140 ºF
• The antimicrobial protection is formulated to last beyond the
useful life of the product on an undamaged surface.
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Last Revision: 03/20/2012 • Date Printed: 03/29/2012 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
1332-SAM
Multiple Service Fixtures
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 1332-SAM, Deck Mounted Multiple Service Valves Combination Triple Service Fixture, polished chrome plated solid brass
construction Full Flow Laboratory Serrated Nozzle. Two 3/8" NPT Male Thread Inlet Shank Assemblies. May Be Used with Most Laboratory
Gases. 909 Valve is Certified for Gas Service per ANSI Z21.15b-2006/CSA 9.1b-2006 by the Canadian Standards Association. Mounting
hardware included. Secondary Control Valve: Full Flow Laboratory Serrated Nozzle. 2 1/2" Metal Cross handle(s) with Eight Point Tapered
Broach and CW Button. Slow compression rebuildable cartridge, opens and closes 360° for fine adjustment, closes with water pressure, features
square tapered stem. .
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 03/20/2012 • Date Printed: 03/29/2012 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454