PRODUCT TYPE
Dual Service Fitting
FEATURES &SPECIFICATIONS
• Chemical resistant satin antimicrobial finish utilizing a
silver ion, glass matrix technology
• Solid brass body construction
• One-piece integral spout
• Removable serrated hose nozzle, catalog #E7
• Plastic cross handle with air, gas and vac service
buttons, catalog #205
• Slo-compression renewable cartridge that closes with
water pressure, tapered square broach to facilitate
handle removal, catalog #217XTLH
• Two ball valves with checks, catalog #909C
• Two 3/8" NPT male inlet shank assemblies
• Mounting hardware included
PERFORMANCE SPECIFICATION
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140° F
• The antimicrobial protection is formulated to last beyond
the useful life of the product on an undamaged surface
WARRANTY
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
COMPLIANT TO
• 909 Laboratory Gas Valve is certified to comply with
ANSI Z21.15b-2006/CSA 9.1b-2006 by the Canadian
Standards Association
1332-SAM
Combination Antimicrobial Fitting
10/09
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
U
.
S
.
G
R
E
E
N
B
U
I
L
D
I
N
G
C
O
U
N
C
I
L
M
E
M
B
E
R
Job Name ____________________________________________________
Item Number _________________________________________________
Section/Tag __________________________________________________
Model Specified ______________________________________________
Architect _____________________________________________________
Engineer _____________________________________________________
Contractor ___________________________________________________
❏ Submitted as Shown ❏ Submitted with Variations
Date _________________________________________________________
LABORATORY
1332-SAM
Multiple Service Antimicrobial Fitting
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No. 1332-SAM, Chemical resistant satin antimicrobial coating, solid brass construction with one-piece integral
spout. Removable serrated hose nozzle. Plastic cross handle with air, gas and vac service buttons. Slo-compression renewable
cartridge that closes with water pressure, tapered square broach to facilitate handle removal, two ball valves with removable
serrated nozzle with check valve, two 3/8" NPT male inlet shank assemblies and mounting hardware included. The 909
Laboratory Gas Valve is certified to comply with ANSI Z21.15b-2006/CSA 9.1b-2006 by the Canadian Standards Association.
5-5/8"
[143mm]
2-1/4 "
[57mm]
5/16" TO 1-1/2"
[8mm-38mm]
WARE THICKNESS
"
[32mm]
1-1/4
11/16"
DIA.
[17mm]
10-1/2"
[267mm]
4-7/8"
[124mm]
1-5/8 "
[41mm]
2-3/8 "
[60mm]
7-5/8 " [194mm]
(CLOSED POSITION)
"
[235mm]
9-1/4
"
[89mm]
3-1/2
"
[238 mm]
9-3/8
"
[44mm]
1-3/4
INLET
FOR
WATER
INLET
FOR
GAS
INDEX
'CW'
3/8" NPT
MALE INLETS
(2 PLACES)
INDEX
'GAS'
10/09 Product specifications subject to change without notice.
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
OPERATION AND MAINTENANCE
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove
spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning this product. Do not
use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and
protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair
parts documents that are located at www.chicagofaucets.com
.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering
a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.