Chicago Faucet 1013-MM User Manual
MECHANICAL FAUCETS
1013-MMCP
Stops and Supplies
Product Type
___________________________________________________
Angle Stop Fitting with Loose Key
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• Stops with 1/2" Inlet
• 2 1/4" Tee Handle
• Slow Compression Metal To Metal Operating Cartridge
• 1/2" NPT Female Thread Inlet
• 3/8" O.D. Female Compression Outlet
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
Last Revision: 12/13/2011 • Date Printed: 03/29/2012 • Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
1013-MMCP
Stops and Supplies
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 1013-MMCP, Angle Stop Fitting with Loose Key, polished chrome plated solid brass construction 2 1/4" Metal Tee
handle(s) with Tapered Square. Slow compression rebuildable cartridge, opens and closes 360° for fine adjustment, closes with water pressure,
features square tapered stem. 1/2" NPT Female Thread Inlet. 3/8" O.D. Female Compression Outlet. Mounting hardware included.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 12/13/2011 • Date Printed: 03/29/2012 • Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...