Chicago Faucet 1006 User Manual
MANUAL FAUCETS
1006-CP
Angle Stop Fitting with Supply Tube
Product Type
___________________________________________________
Angle Stop Fitting with Supply Tube
Job Name ________________________________________________
Features & Specifications
___________________________________________________
• 1/2" O.D. x 12" Flexible Supply Riser
• 2 1/4" Metal Loose Key Tee Handle
• Slow Compression Operating Cartridge
• 1/2" NPT Female Thread Inlet
• Slip Wall Flange
Performance Specification
___________________________________________________
• Rating Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140°F
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Codes & Standards
___________________________________________________
• ASME A112.18.1M
• CSA B125.1
• Certified to NSF/ANSI 61, Section 9 by CSA
Item Number _____________________________________________
Section/Tag ______________________________________________
Model Specified ___________________________________________
Architect _________________________________________________
Engineer _________________________________________________
Contractor ________________________________________________
[ ] Submitted as Shown [ ] Submitted with Variations
Date _____________________________________________________
2/11 Product specifications subject to change without notice
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
1006-CP
Angle Stop Fitting with Supply Tube
Architect/Engineer Specification
________________________________________________________________________________________________________
Chicago Faucets No. 1006-CP, polished chrome plated solid brass body construction. 2-1/4" loose key handle, loose key cap and
plug button. Slow compression renewable cartridge that closes with water, with square tapered broach feature to help facilitate
handle removal. 1/2" x 12" flexible supply riser. 1/2" NPT female inlet. This product is tested and certified to industry standards:
ASME A112.18.1M, CSA B125.1, and Certified to NSF/ANSI 61, Section 9 by CSA.
Operation and Maintenance
________________________________________________________________________________________________________
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation,
remove spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning the
product. Do not use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm
water for cleaning and protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the
installation instructions and repair parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Technical: 800/TEC-TRUE
www.chicagofaucets.com
2/11 Product specifications subject to change without notice
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Loading...