Chicago Electric 95887 User Manual
230V POWDER COAT OVEN
Model
95887
®
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Voltage 230 Volts AC
Frequency 60 Hz
Amperage @ Maximum 6.2 A
Wattage 500 Watts
Heaters Single 500 Watt Heater Block
Cord Rating/Listing 14AWG X 3C
Plug type
Switch Rotary Adjusted Thermostat
Switches included
Temperature control Rotary Thermostat
Thermostat settings 0 - 480°F
Tray 1 Tray, 6 adjustment levels
Door size 21-1/8” W X 21-3/16” H
Door Window size 12-3/4”W X 12-7/8” H
Overall dimensions
No plug included. Oven must be wired to an
appropriate 230 Volt AC Plug
Main Power, On/Off 230 VAC/8 AMP.
Fan Power, On/Off 230 VAC/2 AMP.
33’’ H X 24-1/8” D X 24-5/8” W (Add 3” to Height
for Fan Housing).
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual
near the assembly diagram, or write month and year of purchase if product has
no serial number. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
For technical questions, please call 1-800-444-3353.
Page 2SKU 95887
2.
Always use eye, hand and body protection. Always wear ANSI-approved safety
goggles or full face shield and dust mask/respirator. Always wear fire retardant, heat
proof work gloves, a full length fire retardant apron, long sleeve shirts, long pants
and hard toed leather shoes.
3.
4.
1.
2.
3.
Do not operate Oven in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Extreme temperatures from Oven may ignite
fumes.
Keep bystanders, children, and visitors away while operating. Protect others,
provide barriers or shields as needed.
ELECTRICAL SAFETY
Grounded equipment must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter plugs.
Check with a qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the Oven should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
Use only indoors, do not expose to rain or wet conditions. Water entering the
Powder Coat Oven will increase the risk of electric shock.
Do not abuse the Power Cord. Never use the Power Cord to pull the Plug
from an outlet. Keep the Power Cord away from heat, oil, and sharp edges.
Replace damaged Power Cords immediately. Damaged Power Cords increase
the risk of electric shock.
1.
2.
3.
4.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operating.
Do not use this Oven while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating may result in burns and/or
other serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from from Over surfaces. Loose clothes,
jewelry, or long hair can be caught doors or vent fans.
Avoid accidental starting. Be sure the Power Switch is off before plugging
in.
Do not overreach when loading/unloading this Powder Coat Oven. Keep
proper footing and balance at all times. Proper footing and balance enables
better control in unexpected situations.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95887
TOOL USE AND CARE
1.
2.
3.
4.
5.
Do not use this Oven if the Power Switch does not turn it on or off. If the
Powder Coat Oven cannot be controlled with the Power Switch, it is dangerous and
must be replaced.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing this Oven Such preventive
safety measures reduce the risk of starting the Oven accidentally. Always
unplug the Oven and let it cool down completely before performing any inspection, maintenance, or especially cleaning procedures.
This Oven is dangerous in the hands of untrained users. Never allow children
to come in contact with this product.
Maintain this Powder Coat Oven with care. Keep the Oven clean. Do not use
this Oven if damaged in any way. Tag it, “Do not use” until repaired.
Check for any other condition that may affect the Oven’s operation. If damaged, have the Oven serviced before using. Many accidents are caused by
poorly maintained equipment.
SERVICE
1.
2.
1.
2.
3.
Service to this Powder Coat Oven must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified personnel could
result in a risk of injury.
Follow instructions in the “Inspection, Maintenance, And Cleaning” section
of this manual. Failure to follow maintenance instructions may create a risk of
electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Use this Oven only in a well ventilated area. Avoid high traffic areas
where it could be accidently touched while it is hot. Do not allow anyone to conduct
any activities near the Oven while it is in use, or closely following it’s use while it is
still hot. Always keep the work area free from obstructions, grease, oil, trash and
other debris. NEVER use this Oven near flammable chemicals, dusts, and va-
pors. Do not use this product in a damp or wet location.
Proper location is imperative. This Powder Coat Oven should be placed on a fire
retardant table or stand approximately 36” above floor level to make loading and
unloading easy. It should be protected from direct sunlight or drafts. Make sure the
For technical questions, please call 1-800-444-3353.
Page 4SKU 95887
Loading...