Chicago Electric 95573 User Manual
SOLAR SHED LIGHT
Model
95573
®
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Solar Panel
Type
Light
Power Cord 18 Gauge x 2C x 10’
Lens Acrylic Plastic Lens
Run Time
Battery
Requirement
Light Fixture
Dimensions
Weight 1.85 Lb.
Polycrystalline Silicon Solar Panel
4-Watt Fluorescent Light w/Output Equivalent
to 30 Watts Incandescent
Approximately 50 Minutes Continuous Run Time on
Fully Charged Batteries
4 AA (1.2 VDC) 500 mAH NiCd Rechargeable Batteries
(included)
3-1/16”L x 7-15/16”W x 2-3/16”H
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
1.
2.
1.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered areas invite accidents.
Keep bystanders, children, and visitors away while assembling this product.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Observe work area conditions. Keep work area well lit. Position the Solar Shed
Light panel in an unobstructed area that receives sunlight at least six hours a day.
For technical questions, please call 1-800-444-3353.
Page 2SKU 95573
2.
Do not expose the Shed Light Assembly to rain or wet conditions. You can
however place the solar panel outside, exposed to the elements.
3.
1.
2.
3.
4.
5.
Do not abuse the Power Cord. Never use the Power Cord to carry the Shed
Light or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operat-
ing this product. Do not use this product while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating this
product may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry when installing the
Solar Shed Light. Contain long hair.
Keep children away. Children must never be allowed in the work area. Do not let
them handle the Solar Light.
Avoid accidental starting. Be sure the Power Switch is off before plugging in.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of this product in unexpected situations.
6.
1.
2.
1.
2.
Use safety equipment. Always wear eye protection. Nonskid safety shoes or
hard hat must be used for appropriate conditions. Always wear ANSI-approved
safety goggles when assembling or performing maintenance on this Shed Light.
SHED LIGHT USE AND CARE
Disconnect the Power Cord Plug from the power source before making any
adjustments or changing batteries.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect this products operation. If damaged, have the
Solar Shed Light serviced before using. Many accidents are caused by poorly
maintained products.
SERVICE
With the exception of changing the batteries and replacing the light tube,
servicing of the Shed Light must be performed only by qualified repair per-
sonnel.
When servicing this product use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95573
SPECIFIC SAFETY RULES
1.
2.
3.
4.
5.
Maintain labels and nameplates on the Shed Light. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location. Do not set up the
Solar Shed Light if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgement or reflexes are impaired while taking
drugs. If there is any doubt, do not set up the Solar Light.
Keep the Solar Panel free of dirt, dust and grime. Dust covering the Solar Panel
will block out sunlight causing a decrease or stoppage of efficiency in recharging
the batteries.
WARNING: This product contains or, when used, produces a chemical known
to the State of California to cause cancer and birth defects or other reproduc-
tive harm. (California Health & Safety Code § 25249.5, et seq.)
WARNING: NiCd batteries must be disposed of properly. Do not incinerate.
Batteries may burst, causing personal injury and/or property damage. Contact your
local hazardous waste disposal authority for proper disposal.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram near the end of this manual.
WARNING! Make sure the Power Switch of this product is in its “OFF” position and
that the Solar Shed Light is unplugged from its electrical outlet before making any
adjustments to the tool.
Note: If the Light unit is passing from the outside to the inside of the Shed, take into con-
sideration the clearance needed for the Cord (10) and if the Light is to be mounted
for indoor lighting.
For technical questions, please call 1-800-444-3353.
Page 4SKU 95573
Loading...