Chicago Electric 95563 User Manual
2.5 LITER, NON-MEDICAL
Model
95563
®
ULTRASONIC CLEANER
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 120 Volts AC/60 Hz
Power Cord
Dimensions 7-1/4” H X 11-3/8” L X 9” W
Tank Dimensions 3” D X 9-3/4” L X 5-1/2” W
Tank Capacity 2.5 L
Heated Water Temperature 149° F
4’8”; 18 AWG X3C SVT, 3
prong, 160 W
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
1.
2.
3.
1.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate this product in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Electrical products create sparks which
may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating this product.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Grounded products must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter plugs.
For technical questions, please call 1-800-444-3353.
Page 2SKU 95563
Check with a qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
2.
3.
4.
5.
6.
Double insulated products are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not expose this product to rain or wet conditions. Water entering this product
will increase the risk of electric shock.
Do not abuse the Power Cord. Never use the Power Cord to carry the prod-
ucts or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
When operating a product outside, use an outdoor extension cord marked
“W-A” or “W”. These extension cords are rated for outdoor use, and reduce the
risk of electric shock.
1.
2.
3.
4.
PERSONAL SAFETY
Stay alert. Watch what you are doing, and use common sense when operat-
ing this product. Do not use this product while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating this
product may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Power Switch is off before plugging in.
Carrying this product with your finger on the Power Switch, or plugging it in with the
Power Switch on, invites accidents.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of this product in unexpected situations.
For technical questions, please call 1-800-444-3353.
Page 3SKU 95563
TOOL USE AND CARE
1.
2.
3.
4.
5.
6.
Do not force the product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is designed.
Do not force the product and do not use the product for a purpose for which it is
not intended.
Do not use the product if the Power Switch does not turn it on or off. Any
product that cannot be controlled with the Power Switch is dangerous and must be
replaced.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the product. Such preventive
safety measures reduce the risk of starting the product accidentally. Always un-
plug the product from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
Store an idle Ultrasonic Cleaner out of reach of children and other untrained
persons. Ultrasonic Cleaners are dangerous in the hands of untrained users.
Maintain products with care. Do not use a damaged product. Tag damaged
products “Do not use” until repaired.
Check for breakage of parts and any other condition that may affect the
product’s operation. If damaged, have the product serviced before using.
Many accidents are caused by poorly maintained products.
7.
1.
2.
1.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazardous
when used on another product.
SERVICE
Product service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing this product, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
Maintain labels and nameplates on the product. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
For technical questions, please call 1-800-444-3353.
Page 4SKU 95563
Loading...