Chicago Electric 94761 User Manual
PORTABLE FLUORESCENT
®
WORKLIGHT
94761
OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Power Requirement 120 V~, 60 Hz
Fluorescent Bulb
Line Cord 6’ (L); Two-prong plug
Light Frame Dimensions 9-1/8” (dia.) X 10-1/2” (L)
Switch Round, push button
Weight 4.5 lb.
25 watt
CA-9 Type
E197534E197534
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
1.
2.
3.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate lights in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Lights create sparks which may ignite the
dust or fumes.
Keep bystanders, children, and visitors away while operating a light. Distrac-
tions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
ELECTRICAL SAFETY
1.
Grounded lights must be plugged into an outlet properly installed and ground-
ed in accordance with all codes and ordinances. Never remove the grounding
For technical questions, please call 1-800-444-3353.
English Page 294761
prong or modify the plug in any way. Do not use any adapter plugs. Check with
a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. If the lights should electrically malfunction or break down, grounding
provides a low resistance path to carry electricity away from the user.
2.
3.
4.
5.
Double insulated lights are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a polarized outlet. Do not change the plug
in any way. Double insulation eliminates the need for the three wire grounded
power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not abuse the Power Cord. Never use the Power Cord to carry the lights or
pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately. Dam-
aged Power Cords increase the risk of electric shock.
When operating a light outside, use an outdoor extension cord marked “W-A”
or “W”. These extension cords are rated for outdoor use, and reduce the risk of
electric shock.
PERSONAL SAFETY
1.
2.
1.
2.
3.
Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the light in unexpected situations.
Use safety equipment. Always wear eye protection. Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Always wear ANSI-approved safety goggles and a dust mask/respirator when per-
forming maintenance on this light.
LIGHT USE AND CARE
Use the correct light for your application. Do not use the light for a purpose for
which it is not intended.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the light. Such preventive safety
measures reduce the risk of starting the light accidentally. Always unplug the light
from its electrical outlet before performing any inspection, maintenance, or
cleaning procedures.
Store idle lights out of reach of children and other untrained persons. Lights
are dangerous in the hands of untrained users.
For technical questions, please call 1-800-444-3353.
English Page 394761
4.
Maintain lights with care. Do not use a damaged light. Tag damaged lights “Do
not use” until repaired.
5.
6.
1.
2.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the light’s operation. If damaged, have the light
serviced before using. Many accidents are caused by poorly maintained lights.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one light may become hazardous
when used on another light.
SERVICE
Light service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a light, use only identical replacement parts. Follow instruc-
tions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of electric shock or injury.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the
power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.
GROUNDED LIGHTS: LIGHTS WITH THREE PRONG PLUGS
1.
2.
Lights marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the light should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock. (See Figure A.)
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the light. The green wire in the cord must be the
only wire connected to the light’s grounding system and must never be attached to
an electrically “live” terminal. (See Figure A.)
For technical questions, please call 1-800-444-3353.
English Page 494761
3.
Your light must be plugged into an appropriate outlet, properly installed and grounded
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See Figure A.)
FIGURE A FIGURE B
DOUBLE INSULATED LIGHTS: LIGHTS WITH TWO PRONG PLUGS
1.
2.
1.
2.
3.
Lights marked “Double Insulated” do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code. (See Figure B.)
Double insulated lights may be used in either of the 120 volt outlets shown in the
preceding illustration. (See Figure B.)
EXTENSION CORDS
Grounded lights require a three wire extension cord. Double Insulated lights can
use either a two or three wire extension cord.
As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a seri-
ous drop in voltage, resulting in loss of power and possible light damage.
(See Figure C, next page.)
The smaller the gauge number of the wire, the greater the capacity of the cord. For
example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(See Figure C.)
4.
5.
6.
When using more than one extension cord to make up the total length, make sure
each cord contains at least the minimum wire size required. (See Figure C.)
If you are using one extension cord for more than one light, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(See Figure C.)
If you are using an extension cord outdoors, make sure it is marked with the suffix
“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
For technical questions, please call 1-800-444-3353.
English Page 594761
7.
Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified electri-
cian before using it.
8.
Protect your extension cords from sharp objects, excessive heat, and damp or wet
areas.
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*
(120 OR 240 VOLT)
NAMEPLATE
EXTENSION CORD LENGTH
AMPERES
(at full load)
0 – 2.0 18 18 18 18 16
2.1 – 3.4 18 18 18 16 14
3.5 – 5.0 18 18 16 14 12
5.1 – 7.0 18 16 14 12 12
7.1 – 12.0 18 14 12 10 -
12.1 – 16.0 14 12 10 - -
16.1 – 20.0 12 10 - - -
FIGURE C
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet
* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
SYMBOLOGY
V~
A
n0 xxxx/min.
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions per Minute (RPM)
For technical questions, please call 1-800-444-3353.
English Page 694761
Loading...