Chicago Electric 93784 User Manual
®
50 AMP LOAD - BA50 AMP LOAD - BA
50 AMP LOAD - BA
50 AMP LOAD - BA50 AMP LOAD - BA
CHARGING SYSTEM TESTERCHARGING SYSTEM TESTER
CHARGING SYSTEM TESTER
CHARGING SYSTEM TESTERCHARGING SYSTEM TESTER
TTERTTER
TTER
TTERTTER
Y ANDY AND
Y AND
Y ANDY AND
93784
OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written consent
of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
ytilibapaC
yticapaCtseTdaoL spmAgniknarcdloc005-003;spmA05
reteMyalpsiD )mumixam(CDV61-0,golanA
elcyCtseT
spmalC/selbaCyrettaB 911/
snoisnemiDllarevO 111/
serutaeF teefrebburruofdnaeldnahgniyrraC
tuptuometsys
setunim5nistset3otpu
2
2
1
3xW"7xL"
/4D"
spmalcdetalp-reppoC;"
gnigrahchtiwretsetyrettabCDV21dna6
;nwodloocetunim1htiwtsetrepsdnoces01
Save This Manual
You will need the manual for the safety warnings and precautions, operating and
maintenance procedures. Keep your invoice with this manual in a safe and dry
place for future reference.
SAFETY PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
4. Do not force the tool. Use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed.
SKU 93784 For technical questions, please call 1-800-444-3353. Page 2
5. Do not use the power tool if the Power Switch does not turn it on or off. Any tool
that cannot be controlled with the Power Switch is dangerous and must be
replaced.
6. Store idle tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
7. Maintain tools with care. Keep clean. Do not use a damaged tool. Tag damaged
tools “Do not use” until repaired.
8. Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
9. Maintain labels and nameplates on this tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
10. Always wear ANSI approved safety impact eye goggles and heavy
work gloves when using this tool. Using personal safety devices reduce
the risk for injury. Safety impact eye goggles and heavy work gloves
are available from Harbor Freight Tools.
Battery acid may cause severe injury to eyes; always wear ANSI
approved safety goggles. Avoid touching eyes while working with or
near a battery. In case of accidental contact, rinse eyes with clean
water for at least 5 minutes and see a doctor immediately.
11. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use this tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a
damp or wet location.
12. People with pacemakers should consult their physician(s) before using this
product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
Caution is necessary when near the coil, spark plug cables, or distributor of a
running engine. The engine should always be off if adjustments are to be made
to the distributor.
SKU 93784 For technical questions, please call 1-800-444-3353. Page 3
Loading...