Chicago Electric 93366 User Manual

SPOTLIGHT

®

1,000,000 CANDLE POWER

93366

ASSEMBLY & OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd. / Camarillo, CA 93011

Copyright © 2005 by Horbor Freight Tools®. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For Technical questions and replacement parts, please call 1-800-444-3353.

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:

Model__________ Serial No.__________ Purchase Date_________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you
read the entire manual to become familiar with the unit before you begin assembly.

Technical Specifications

Tool Name: Spotlight, 1,000,000 Candle Power
Item Number: 93366
Housing Diameter: 6”
Battery: 6 VDC (U.L. Listed)
Lens Adapter: 5”
Lens Construction: 1/8” Glass
Candle Power: 1,000,000
Light Source: Quartz Halogen Bulb (55W)
Handle: Pistol Grip
Trigger: Squeeze Type with Trigger Hold
Power Adapter: 120 VAC / 60 Hz <-> 9 VDC
Charger: U.L. Listed
Car Adapter: Lighter Type with 5-1/2” Cord
Tool Weight: 3 Lbs.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.

THE OPERATOR

PLEASE REMEMBER:

Never look directly into the Spotlight.

Avoid touching the Lens as it may become hot during operation.

Do not disassemble the Battery or remove any parts from the Battery and surrounding connections.

Do not allow the Spotlight to be exposed to fire or high heat as this may result in an explosion.

Grounding/Voltage Warning:

Common household current is 110-120 volts. As long as the outlet used with the tool is rated from 110-120 V
there will be no complications using it with household receptacles. Plug the Power Adapter into a 110-120V
properly grounded outlet protected by a 15-amp, dual element time delay or circuit breaker.

NEVER try to plug a 110-120V tool into a 220-240V circuit or serious complications and possible injury to the
operator may occur. The plugs have different shapes to prevent this.

REV 01/07

SKU 93366 Page 2