Chicago Electric 93035 User Manual

®

DIGITAL ULTRASONIC CLEANER

(FOR NONMEDICAL USAGE)

Model 93035

ASSEMBLY AND OPERATING INSTRUCTIONS

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

Copyright

manual or any artwork contained herein may be reproduced in any shape or form

For technical questions and replacement parts, please call 1-800-444-3353.

©

2005 by Harbor Freight Tools®. All rights reserved. No portion of this

without the express written consent of Harbor Freight Tools.

PRODUCT SPECIFICATIONS

Electrical Input 115 Volts AC / 60 Hz / 60 Watts Usage
Tank Capacity 42 oz. / 51/4 Cups / 1.25 L
Frequency Output 42 KHz
Tank Dimensions 21/2” Deep x 65/8” Long
Weight 5 Lbs.
Cleaning Cycles (in seconds) 90 / 180 / 280 / 380/ 480

Note: Not For Medical Use

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.

REV 05/05

Page 2SKU 93035 For technical questions, please call 1-800-444-3353.

ELECTRICAL SAFETY

4. Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically malfunction or

break down, grounding provides a low resistance path to carry electricity away
from the user.

5. Double insulated tools are equipped with a polarized plug (one blade is

wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates the need for the

three wire grounded power cord and grounded power supply system.

6. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.

7. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.

8. Do not abuse the Power Cord. Never use the Power Cord to carry the tools

or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.

Damaged Power Cords increase the risk of electric shock.

9. When operating a power tool outside, use an outdoor extension cord
marked “W-A” or “W”. These extension cords are rated for outdoor use, and
reduce the risk of electric shock.

PERSONAL SAFETY

10. Stay alert. Watch what you are doing, and use common sense when
operating a power tool. Do not use a power tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.

Page 3SKU 93035 For technical questions, please call 1-800-444-3353.

12. Avoid accidental starting. Be sure the Power Switch is off before plugging

in.

13. Do not overreach. Keep proper footing and balance at all times.

TOOL USE AND CARE

14. Do not overload the Ultrasonic Cleaner The Ultrasonic Cleaner will do the job
better and safer at the rate for which it is designed.

15. Do not use the Ultrasonic Cleaner if the Power Switch does not turn it on or
off. Any tool that cannot be controlled with the Power Switch is dangerous and
must be replaced.

16. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.

17. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.

18. Maintain tools with care. Do not use a damaged tool. Tag damaged tools “Do
not use” until repaired.

19. Check for misalignment or binding of moving parts, breakage of parts, and

any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly

maintained tools.

SERVICE

20. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.

21. When servicing a tool, use only identical replacement parts. Follow

instructions in the
manual. Use of unauthorized parts or failure to follow maintenance instructions

may create a risk of electric shock or injury.

“Inspection, Maintenance, And Cleaning”

section of this

Page 4SKU 93035 For technical questions, please call 1-800-444-3353.