20” HIGH VELOCITY AIR
CIRCULATOR
66878
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
READ AND SAVE THESE INSTRUCTIONS.
Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
CAUTION
Read Rules for Safe Operation and
Instructions Carefully.
WARNING
bly of the fan before switching on the
fan.
Inspect before use; do not use if parts 8.
are loose or damaged.
To reduce the risk of re or elec-1.
tric shock, do not use this Fan
with any solid-state speed control
device.
The three-prong plug provided 2.
with this fan must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs
with this grounded fan plug. Un-
modied plugs and matching outlets
will reduce risk of electric shock.
Do not leave Fan running while 3.
unattended.
RULES FOR SAFE
OPERATION
Do not leave Fan running while unat-1.
tended.
Never insert ngers, pencils, or any 2.
other object through Front or Rear
Blade Grills.
Disconnect Fan when relocating it.3.
Disconnect Fan before removing 4.
grilles for cleaning.
Be sure fan is on a stable surface 5.
when operating to avoid overturning.
For indoor use only. DO NOT use fan 6.
in window or expose to water. Rain
may create electrical hazard.
Wear ANSI-approved safety goggles 7.
during set up. Complete the assem-
SAVE THESE
INSTRUCTIONS.
Safety Symbols
In this manual, on the labeling,
and all other information provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
CAUTION, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
SKU 66878 For technical questions, please call 1-800-444-3353. Page 2
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
Additional Safety Instructions
Maintain labels and nameplates on 1.
the tool. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Do not run Power Cord under car-2.
peting. Do not cover cord with throw
rugs, runners or similar coverings. Ar-
range cord away from trafc area and
where it will not be tripped over. Do
not let cord hang over edge of table
or counter, or touch hot surfaces. Do
not pull on cord.
manual cannot cover all conditions
and situations that may occur. It must
be understood by operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by operator.
Use only in dry environments. Do not 3.
use in bathrooms, laundry area, near
sinks or other sources of water.
This product is not a toy. Keep it out 4.
of reach of children.
WARNING: Handling cord on this 5.
product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling. (California Health & Safety Code § 25249.5,
et seq.)
People with pacemakers should 6.
consult their physician(s) before use.
Electromagnetic elds in close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
The warnings, precautions, and in-7.
structions discussed in this instruction
REV 09f
SKU 66878 For technical questions, please call 1-800-444-3353. Page 3