Chicago Electric 45802 User Manual
PRESSURE WPRESSURE W
®
PRESSURE W
PRESSURE WPRESSURE W
ASHERASHER
ASHER
ASHERASHER
2 HP2 HP
2 HP
2 HP2 HP
, ELECTRIC, ELECTRIC
, ELECTRIC
, ELECTRIC, ELECTRIC
45802
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our W eb site at http://www.harborfreight.com
Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Revised Parts List and Diagram REV 09/02
Specifications
ITEM
Motor
Rated Current
Rated Voltage
Rated Frequency
Max. Pressure
Max. Flow
GFCI Plug Cord
Accessories Included
Net Weight
2 HP
13A
120V
60Hz
1300 PSI
1.7 GPM
36’ 5” L
Jet Lance Wand, Foaming Lance,
Hose (16’ 17”), Spray Gun, Adapter
(Garden Hose Thread: 3/4”-11.5 TPI,
Female)
20.55lbs.
DESCRIPTION
83ZN
E191195
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. K eep
your invoice with this man ual. Write the invoice number on the inside of the front
cover. Keep the manual and in v oice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep children away from this product. Children must never be allowed in
the work area unless under close adult supervision.
2. Know how to stop the product. Be thoroughly familiar with all controls
necessary for operation of this product before use.
3. Stay alert. Watch what you are doing, use common sense. Do not operate
any product when you are tired.
4. Do not operate product if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the product.
5. Observe work area conditions. Keep work area clear of all persons.
6. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
SKU 45802 Page 2
7. Maintain product with care. Follow maintenance instructions specified in
this manual.
8. Replacement parts and accessories. When servicing, be sure to use only
identical replacement parts. Use of any other parts will void the warranty.
Only use accessories intended for use with this product. Approved
accessories are available from Harbor Freight Tools.
9. Do not force product. It will do the job better and more safely at the rate
for which it was intended. Do not use inappropriate attachments in an
attempt to exceed the product capacity.
10. Use the right product for the job. Do not attempt to force a small product
or attachment to do the work of a larger industrial product. There are certain
applications for which this product was designed. Do not modify this product
and do not use this product for a purpose for which it was not intended.
11. Use eye and ear protection. Always wear ANSI approved impact safety
goggles.
12. Disconnect power. Unplug product when not in use.
13. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before plugging in. Do not carry any product with your finger
on the trigger, whether it is plugged in or not.
14. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use the
product if any switch does not turn On and Off properly.
15. Guard against electric shock. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
16. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualified technician.
17. Risk of injection or injury. Do not aim pressure washer or its extensions
directly at people or animals.
18. Ground Fault Circuit Interrupter Protection. This pressure washer is
provided with a ground-fault circuit-interrupter (GFCI) built into the plug of
the power-supply cord. This device provides additional protections from the
risk of electric shock. Should replacement of the plug or cord become
necessary , use only identical replacement parts that include GFCI protection.
SKU 45802 Page 3
19. Servicing of a double-insulated appliance. In a double-insulated product,
two systems of insulation are provided instead of grounding. No grounding
means is provided on a double-insulated product, nor should a means for
grounding be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system, and should be done
only by a qualified service personnel. Replacement parts for a doubleinsulated product must be identical to the parts they replace. A doubleinsulated product is marked with the words “DOUBLE INSULATION” or
“DOUBLE INSULATED”. This symbol may also be marked on the
product.
20. Extension Cord. Use only extension cords intended for outdoor use. These
extension cords are identified with the words ”ACCEPTABLE FOR USE
WITH OUTDOOR APPLIANCES; STORE INDOORS WHEN NOT IN USE”.
Use only extension cords having an electrical rating greater than or equal to
that of the product. Do not use damaged extension cords. Examine
extension cord and do not yank on any cord to disconnect. Keep cord away
from wet surfaces, heat and sharp edges. Always disconnect the extension
cord from the receptacle before disconnecting the product from the
extension cord.
Warning: To reduce the risk of electrocution, inspect cord before use. Do not
use if cord appears damaged in any way. Keep all connections dry and off
the ground. Do not touch plug with wet hands.
Note: Performance of this product (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect product
performance.
General Safety Rules
1. High Pressure Hose can develop leaks from wear, kinking, abuse, etc. Water
spraying from a leak is capable of injecting material into skin. Do not point
the Pressure Washer spray at people or animals.
2. Locate the Pressure W asher in areas awa y from combustible materials,
combustible fumes or dust.
3. Some chemicals or detergents may be harmful if inhaled or ingested,
causing severe nausea, fainting or poisoning. These harmful elements may
cause property damage or severe injury.
4. Do not allow children to operate the pressure washer at any time.
5. Before starting the Pressure Washer in cold weather, check all parts of the
equipment and be sure ice has not formed anywhere on the equipment.
SKU 45802 Page 4
6. Units with broken or missing parts, or without protective housing or covers
should never be used.
7. The high pressure stream of water that this equipment produces can pierce
the skin and its underlying tissues, leading to serious injury and possible
amputation.
8. For household use. For indoor or outdoor use. For cold tap water use.
9. Always wear eye protection when you use this equipment or when you are in
the vicinity where this equipment is in use.
10. Operate the Pressure Washer at no more than the fluid pressure rated for
this model.
11. Never move the machine by pulling on the High Pressure Hose. Use the
handle provided on the top of the unit.
12. Use an ANSI approved respirator mask whenever there is a chance that
vapors may be inhaled. Read all instructions with the mask so you are
certain that the mask will provide the necessary protection against inhaling
harmful vapors.
13. Keep the Hose connected to the machine and the Spray Gun while the
system is pressurized. Disconnecting the Hose while the unit is pressurized
is dangerous.
14. Hold the Spray Gun firmly in your hand before you start the unit. Failure to
do so could result in injury from a whipping Spray Gun. Do not leave the
Spray Gun unattended while the machine is running.
15. Cleaning area should have adequate slopes and drainage to reduce the
possibility of a fall due to a slippery surface.
16. Keep water spra y from electric wiring or fatal electric shock ma y result.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution
are factors which cannot be built into this product, but must be supplied by
the operator.
Unpacking
When unpacking, check to make sure all parts listed on Pages 12 and 14 are
included. If any parts are missing or broken, please call Harbor Freight Tools at
the number on the cover of this manual. In case of problems with this unit, do not
use it until you have consulted an authorized service center.
SKU 45802 Page 5
Loading...