Chicago Electric 44829 User Manual
14” CUT OFF SAW
44829
SET UP AND OPERATING INSTRUCTIONS
(Blade Sold Separately)
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described
herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
REV 07h
SPECIFICATIONS
Motor 120 V~ / 60 Hz / 1500 W / 1 Phase, 2 HP
Speed 3400 RPM
Blade Size 14” Diameter x 1” Arbor (Not Included)
Miter Angle 0-45° Right 0-30° Left
Table Size 9-3/4” x 10-1/4”
Cutting
Capacities
Steel Pipe - 4” Dia. x 1/4” Wall Thickness
Angle Iron - 3” x 3” x 1/2” Wall Thickness
Solid Steel - 1-3/8” Dia.
Vise Assembly and Spanner Wrench Included.
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep the manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
Avoid working alone1. . If an accident happens, an assistant can bring help.
Keep work area clean2. . Cluttered areas invite injuries.
Observe work area conditions3. . Don’t expose to rain. Keep work area well
lighted.
Keep children away4. . Children must never be allowed in the work area. Do not
let them handle machines, tools, or extension cords.
Store idle equipment5. . When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
Dress properly6. . Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear
are recommended when working. Wear restrictive hair covering to contain long
hair.
Use eye and ear protection7. . Always wear ANSI approved impact safety goggles.
Wear an ANSI approved face shield when producing metal lings.
Do not overreach8. . Keep proper footing and balance at all times. Do not reach
over or across electrical cables or frames.
REV 01i, 01k, 07g, 07h
SKU 44829 For technical questions, please call 1-800-444-3353. Page 2
Maintain tools with care9. . Inspect tool cords periodically and, if damaged, have
them repaired by an authorized technician.
Use the right tool for the job10. . Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
Stay alert11. . Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
Check for damaged parts12. . Before using any tool, any part that appears dam-
aged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any
broken parts or mounting xtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by
a qualied technician. Do not use the tool if any switch does not turn On and Off
properly.
Do not operate tool if under the inuence of alcohol or drugs13. . Read warning
labels on prescriptions to determine if your judgment or reexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
Use proper size and type extension cord14. . If an extension cord is required, it
must be of the proper size and type to supply the correct current to the tool. Oth-
erwise, the extension cord could melt and catch re, or cause electrical damage
to the tool. This tool requires use of an extension cord of 0 to 12 amps capability
(up to 50 feet), with wire size rated at 14 AWG. Longer extension cords require
larger size wire. If you are using the tool outdoors, use an extension cord rated for
outdoor use (signied by “WA” on the jacket).
Maintenance15. . For your safety, maintenance should be performed regularly by a
qualied technician.
When servicing, use only identical replacement parts.16. Use of any other parts
will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
People with pacemakers should consult their physician(s) before use. Electromag-17.
netic elds in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
WARNING: This product contains or, when used, produces a chemical known 18.
to the State of California to cause cancer and birth defects or other reproductive
harm. (California Health & Safety Code § 25249.5, et seq.)
The warnings, cautions, and instructions discussed in this instruction manual can-19.
not cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
REV 08a, 08h
SKU 44829 For technical questions, please call 1-800-444-3353. Page 3
Loading...