5
Automatic Dimming Rearview
Mirror with OnStar®, Compass
and Temperature Display
(if equipped)
Controls for the dimming feature, as well
as OnStar
®
(if equipped) and the compass and temperature displays, are
located on the bottom of the mirror.
When on, the automatic interior dimming
rearview mirror automatically dims to the
proper level to minimize glare from lights
behind you when it’s dark outside.
Turn the self-dimming function on
or off
• Press and hold for approximately
eight seconds.
Use the OnStar
®
Communications
system
• Press to connect to an OnStar
®
Advisor.
• Press to answer or end a call
from the OnStar®Center.
• Press in an emergency to
connect to an OnStar®Advisor who
can contact the nearest emergency
services provider.
Turn the outside temperature displays and compass readings on or off
• Press .
Display temperature
• Press and hold for four seconds
(until the display blinks) to toggle
between °C and °F. Once the desired
°C or °F is displayed, release the
button. Wait four seconds and the
temperature will be displayed.
See Section 2 of your Owner Manual.
Automatic Climate Control
System (if equipped)
A
B
C
D
In addition to its automatic temperature
control feature, this climate control system allows the driver and front passenger to choose their own temperature
settings.
Adjust settings for automatic
operation
• Push the AUTO button (“A” above)
and adjust the temperature knob (“B”
above) to the desired temperature.
When automatic operation is active, the
system will control the inside temperature, air delivery, and fan speed.
Set same temperature for driver and
front passenger
• Press and hold the AUTO button for
four seconds.
•
Press and hold the AUTO button again
for four seconds to return to individual
driver/front passenger controls.
Select air distribution manually
• Press and release the MODE button
(“C” above) until the desired source
of air is indicated on the display.
The MODE feature allows you to select
air delivery to the floor, the instrument
panel outlets, or the windshield outlets.
Manually raise or lower fan speed
• Press the upper or lower portion of
the FAN control button (“D” above).
See Section 3 of your Owner Manual.