Chevrolet FULL-SIZE TRUCK, FULL-SIZE VAN Owner Manual

Black plate (1,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
2013 Chevrolet/GMC Full-Size Truck and
Van Navigation System M
Infotainment System .. . . . . 3
Introduction . . . . . . . . . . . . . . . . . 3
Radio . . . . . . . . . . . . . . . . . . . . . . . 10
AM-FM Radio . . . . . . . . . . . . . . . . . 10
Satellite Radio . . . . . . . . . . . . . . . . 15
Audio Players . . . . . . . . . . . . . 15
CD/DVD Player . . . . . . . . . . . . . . . 15
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Hard Drive Device (HDD) . . . . . 22
Rear Seat Infotainment . . . 35
Rear Seat Entertainment (RSE)
System . . . . . . . . . . . . . . . . . . . . . . 35
Rear Seat Audio (RSA)
System . . . . . . . . . . . . . . . . . . . . . . 40
Navigation . . . . . . . . . . . . . . . . . 42
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . . 42
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Navigation Symbols . . . . . . . . . . . 47
Destination . . . . . . . . . . . . . . . . . . . . 51
®
OnStar
Download . . . . . . . . . . . . . . . . . . . . 63
Configure Menu . . . . . . . . . . . . . . . 64
Global Positioning
System (GPS) . . . . . . . . . . . . . . . 72
Vehicle Positioning . . . . . . . . . . . . 73
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . . 73
If the System Needs
Service . . . . . . . . . . . . . . . . . . . . . . 74
Map Data Updates . . . . . . . . . . . . 74
Database Coverage
Explanations . . . . . . . . . . . . . . . . . 75
Destination
Voice Recognition . . . . . . . . 75
Phone . . . . . . . . . . . . . . . . . . . . . . 83
Bluetooth . . . . . . . . . . . . . . . . . . . . . 83
Trademarks and License
Agreements . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . i-1
91
Black plate (2,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Black plate (3,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12

Infotainment System 3

Introduction

The names, logos, emblems, slogans, vehicle model names, and vehicle body designs appearing in this manual including, but not limited to, GM, the GM logo, CHEVROLET, the CHEVROLET Emblem, and the names TAHOE, SUBURBAN, AVALANCHE, SILVERADO, and EXPRESS, GMC, the GMC Truck
Litho in U.S.A. Part No. 22950588 B Second Printing
Emblem, and the names SIERRA, SIERRA DENALI, YUKON, YUKON XL, YUKON DENALI, YUKON XL DENALI, and SAVANA are registered trademarks of General Motors Corporation LLC.
The information in this manual supplements the owner manual. This manual includes the latest information available at the time it was printed. We reserve the right to make changes in the product after that time without notice. For vehicles first sold in Canada, substitute the name General Motors of Canada Limited for Chevrolet Motor Division or GMC whenever it appears in this manual.
Keep this manual with the owner manual in the vehicle, so it will be there if it is needed. If the vehicle is sold, leave this manual in the vehicle.
Canadian Vehicle Owners
Propriétaires Canadiens
A French language copy of this manual can be obtained from your dealer or from:
On peut obtenir un exemplaire de ce guide en français auprès du concessionnaire ou à l'adresse suivante:
Helm, Incorporated P.O. Box 07130 Detroit, MI 48207
1-800-551-4123 Numéro de poste 6438 de langue française www.helminc.com
©
2012 General Motors LLC. All Rights Reserved.
Black plate (4,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
4 Infotainment System
.

Overview

Read this manual thoroughly to become familiar with how the navigation system operates.
The navigation system includes navigation and audio functions.
Keeping your eyes on the road and your mind on the drive is important
Set up the navigation features, such as entering an address or a preset destination.
.
Set up phone numbers in advance so they can be called easily by pressing a single button or a single voice command for navigation systems equipped with phone capability.
for safe driving. The navigation
WARNING
system has built-in features intended to help with this by disabling some features when driving. A grayed-out function is not available when the vehicle is moving.
All functions are available when the vehicle is parked. Do the following before driving:
.
Become familiar with the navigation system operation, buttons on the faceplate, and touch-sensitive screen buttons.
.
Set up the audio by presetting favorite stations, setting the tone, and adjusting the
Taking your eyes off the road too long or too often while using the navigation system could cause a crash and you or others could be injured or killed. Focus your attention on driving and limit glances at the moving map on the navigation screen. Use voice guidance whenever possible.
Use the navigation system to:
.
.
{
Plan a route.
Select a destination using various methods and choices.
speakers.
.
Follow turn-by-turn route and map guidance with voice prompts, only if permitted by traffic laws, controls, and conditions.
.
Receive RDS broadcast announcements.
Always be alert and obey traffic and roadway laws and instructions, regardless of the guidance from the navigation system. Because the navigation system uses street map information that does not include all traffic restrictions or the latest road changes, it may suggest using a road that is now closed for construction or a turn that is prohibited by signs at the intersection. Always evaluate whether following the system's directions is safe and legal for the current conditions.
When the navigation system is turned on, a screen may appear with information that must be read and acknowledged before accessing some navigation features.
Black plate (5,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 5
After acknowledging the start up information, the NAV (Navigation) and DEST (Destination) functions are accessible. Information can now be entered or deleted, and other functions accessed. See instructions later in this section.
Every 50 times the vehicle is started and the navigation system is turned on, the Caution screen appears. After reading the caution, select OK to load the map data information. If OK is not selected, all control buttons except for NAV (Navigation) and DEST (Destination) can be accessed.
When getting started, set your preferences or delete information in the navigation system using various options.
Navigation System Overview
Black plate (6,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
6 Infotainment System
1. O (Power/Volume)
2.
Z (Eject)
3. Auxiliary Input Jack
4. Multifunction Knob
5. SRCE (Source)
6 (Seek Next/Forward)
6.
7.
7 (Seek Previous/Reverse)
J (Play/Pause)
8.
9.
4 (Information)
10. FAV (Favorite)
11. MENU
12. RPT (Repeat)
13. DEST (Destination)
14. NAV (Navigation)
1. Press NAV to view the navigation map screen. The map and the vehicle's current location displays.
2. Press NAV to change between a map/audio split view or a full map view.
NAV (Navigation) Menu
The Navigation menu screen accesses the navigation system settings.
Config Menu
Press MENU to display the Config Menu. The Config Menu is used to change the screens for the radio, navigation display, phone, vehicle configuration, and time features.
Turn the Multifunction knob to scroll through the available setup features. Once the desired feature displays, press the Multifunction knob or press the desired feature on the screen, to display more options within that feature.
Languages
To change the display language, see Vehicle Personalizationin the vehicle owner manual.
Black plate (7,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 7
The vehicle supports English, French (Canadian), and Spanish. The default language is English.
English and Metric Unit Conversion
To change the display readings between English and metric units, see Driver Information Center (DIC)in the vehicle owner manual for more information.
Deleting Personal Information
The navigation system can record and store destinations and personal information such as names and addresses.
At times, such as when you are selling or disposing of your vehicle, you may want to delete this information:
.
Previous Destinations.
.
Address Book, Fav Route, Preset Destinations, and HDD music files.
Storing Radio Station Presets
Up to 36 preset stations can be stored. AM, FM, and SiriusXM equipped) can be mixed. To store presets:
1. Press
O to turn the system on.
2. If viewing a map screen, press SRCE, FAV, or press the source screen button.
3. Select the band.
4. Press
6, 7 , or turn the
Multifunction knob to select the desired station.
5. Press and hold one of the preset screen buttons for more than two seconds.
6. Repeat the steps for each preset.
To change the number of preset pages, see AM-FM Radio on page 10.
®
(if
Entering an Address and Point of Interest, and Storing Preset Destinations
The vehicle must be in P (Park) to perform these operations.
Entering an Address
If having trouble finding a city or a street name:
.
Enter the street name first instead of the city name, or vice versa.
.
Enter more characters or reduce the amount of characters to reduce or expand the available options.
To set a destination by entering a street name:
1. Press DEST.
2. If necessary, enter the state/ province name. The last state/ province name is automatically recalled.
Black plate (8,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
8 Infotainment System
3. Select the street name field. Enter the street name. Do not enter directional information or
street type. Use the space screen button between street and city names. Use the
backspace delete an incorrect character.
A list displays if four or fewer names are available. If there are more than four, there is a match counter with a number of available streets. Press the List button to view the list and select the street.
4. Select the city from the list or enter the city name.
5. Enter the house number. This field is automatically selected.
6. Press OK. The address information screen displays the address entered.
7. Press Go if correct. The route will calculate.
q screen button to
U
8. Select the route preference for Fastest, Shortest, or Easiest. The chosen route preference highlights. See Destination on page 51.
9. Press the Start Guidance screen button and the route is now ready to be started.
See Address Entryunder Destination on page 51.
Entering a Point of Interest (POI)
To set a destination by entering a Point of Interest (POI):
1. Press
2. A caution could appear. Press
3. Press DEST.
4. Press the Point of Interest
5. Enter the specific title of the POI
O to turn the system on.
OK to proceed.
screen button.
in the POI name space.
If four or less names are available, a list displays. If more than four are available, there is a match counter with a number in it, representing the number of available POI names. Press List to view the list. Select the POI.
6. Press Go. The system calculates the route.
7. Select the route preference for Fastest, Shortest, or Easiest. The system highlights the route.
8. Press the Start Guidance screen button. The route is now ready to be started.
See Point of Interest (POI)under Destination on page 51.
Storing Preset Destinations
1. Press O to turn the system on.
2. A caution could appear. Press OK to proceed.
3. Press DEST.
Black plate (9,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 9
4. Enter a destination. See Destination on page 51.
5. Press Save from the map screen to add the current final destination to the address book.
The address book screen appears.
6. Press the Edit screen button. An alpha-keyboard displays. Enter the name.
7. Press and hold one of the screen buttons at the bottom of the screen until the text in the button changes.
The address book entry name appears in that preset destination screen button and is now available to select from the Select Destination screen. See Using the Stored Preset Destinationsnext in this section to select it as a destination.
See Preset Destinationunder Destination on page 51.
Using the Stored Preset Destinations
These destinations are available for selection while driving.
1. Press
2. A caution could appear. Press
3. Press DEST.
4. Press one of the available preset
5. Select the route preference for
6. Press the Start Guidance screen
See Preset Destinationunder Destination on page 51.
O to turn the system on.
OK to proceed.
destination screen buttons. The system calculates the route.
Fastest, Shortest, or Easiest. The system highlights the route.
button. The route is now ready to be started.
Canceling Guidance
Guidance is canceled once you arrive at the final destination. To cancel guidance prior to arrival at the final destination:
1. Press DEST.
2. Press the Cancel Guidance screen button.
3. Press Yes to confirm cancellation.
Voice Guidance
To adjust the volume of voice guidance prompts:
1. Press MENU to enter the Config Menu features. Turn the Multifunction knob until Nav displays. Press the Multifunction knob to select Nav or press the Nav screen button to display more options within that feature.
2. Press the Voice Prompt screen button.
Black plate (10,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
10 Infotainment System
3. Press the Voice Volume screen button.
4. Press + or – to increase or to decrease the volume of the voice prompts.
See Voice Volume under Using the Navigation System on page 42.
Cleaning the Display
Notice: Using abrasive cleaners when cleaning glass surfaces could scratch the glass. Use only a soft cloth and do not spray cleaner directly on the system as it could affect the mechanical parts.
Do not wipe the panel with a hard cloth or use a volatile liquid such as paint thinner, it could scratch the surface or erase the characters on the buttons.

Radio

AM-FM Radio

Playing the Radio
Audio Source Menu
O (Power/Volume):
1. Press to turn the radio on or off.
2. Turn to increase or decrease the volume. The volume is adjusted for the current audio source, active navigation voice guidance, or voice prompts.
The steering wheel controls can also be used to adjust the volume. See Steering Wheel Controlsin the Index of the vehicle owner manual for more information.
Also, see Radio Settingsand Automatic Volumein this section.
Multifunction Knob: Turn to change the radio station. See Finding a Stationfollowing for more information.
SRCE (Source): Press to select the AM, FM, SiriusXM (if equipped), HDD, DISC, USB, AUX, and AV.
The audio sources can also be changed by using the steering wheel controls. See Steering Wheel Controlsin the index of the vehicle owner manual for more information.
If the audio system is on and a map screen is being viewed, audio information displays at the top of the map screens.
®
Black plate (11,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 11
Press the audio display screen button to display the current audio source screen. The display shows a split screen with the audio source screen on the left side and the map or guidance screen on the right side. Press the Full Map screen button to exit the split view screen.
Navigation Audio System
Tone Settings
To access the sound menu, press MENU, then select Tone.
Setting the Tone
To adjust the bass, treble and midrange using the sound menu:
.
Bass: Press + or to change the level.
.
Mid (Midrange): Press + or to change the level.
.
Treble: Press + or to change the level.
Adjusting the Speakers
To adjust the speaker balance:
.
Press and hold o for more sound from the left speakers
or
p for more sound from the
right speakers. The middle position balances the sound between the left and right speakers.
To adjust the speaker fade:
.
Press and hold w for more sound from the front speakers
x for more sound from the
and rear speakers. The middle position balances the sound between the front and rear speakers.
Black plate (12,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
12 Infotainment System
EQ Settings
The following touch-sensitive
There are two different sound systems available for the trucks included in this navigation system supplement. Some trucks will have the EQ setting options that include Manual or Talk. Other trucks have the EQ setting options of Normal, Driver, Rear, and Stereo.
EQ (Equalization): The EQ settings are selected through the sound menu.
buttons are located at the bottom of the screen:
Normal: Select to adjust the audio to be in normal mode. This provides the best sound quality for all seating positions.
Driver: Select to adjust the audio to give the driver the best possible sound quality.
Rear: Select to adjust the audio to give the rear seat occupants the best possible sound quality.
Surround: Select to adjust the audio to give the best overall sound quality for all seating postions.
Radio Settings
To access the Radio settings menu, press MENU to display the Config Menu. Turn the Multifunction knob to scroll through the available features until the Radio feature displays. Press this feature to display more options.
Audio system settings or features can be customized for:
Audio Pilot (If Equipped)
Select OFF, Low, Medium, or High sensitivity to automatically adjust the volume to minimize the effects of unwanted background noise that can result from changing road surfaces, driving speeds or open
Black plate (13,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 13
windows. This feature works best at lower volume settings where background noise is typically louder than the sound system volume.
Number of Favorite Pages
Change the number of mixed-band preset pages when using FAV. Press 1-6 to select the number of preset lists.
HDD FAV Pages (Number of Favorite Categories for HDD Mode)
Selects the categories such as Playlist, Artist, Album, and Genre to be used as a favorite category during HDD mode.
®
DivX
VOD
®
The DivX
VOD feature must be
registered before it can be used.
®
1. Press the DivX button to display the DivX
VOD screen
®
Video on Demand menu.
2. Press the Registration Code screen button to display the Registration Code information display.
3. Press the Deactivation option to unregister this device.
Finding a Station
Select the band, see Audio Source Menuin this section.
Turn the Multifunction knob to find a radio station. To select a preset station, press the corresponding preset button.
See Mixed-Band Presetsfollowing for more information.
Seeking a Station
6 or 7 to search for a
Press station.
Local Station List Search
To find a list of local stations in the current band AM or FM band, press the Multifunction knob or touch the audio source screen. The radio performs a search for available stations.
Mixed-Band Presets
Up to 36 preset stations can be stored. Each page can store six preset stations. The presets within a page can be from different radio bands.
Black plate (14,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
14 Infotainment System
To scroll through the pages, press FAV. The current page number displays above the preset buttons. The stored stations for each Favorites page displays on the touch-sensitive preset buttons at the bottom of the screen. The number of preset FAV lists can be changed.
To store a radio station to a mixed-band preset list:
1. Press SRCE, then press AM, FM, or SiriusXM (if equipped) to select the desired band.
2. Tune to the station.
3. Press and hold one of the preset buttons for more than two seconds. The station frequency appears on the preset button at the bottom of the display.
4. Repeat the steps for each preset in Favorites page.
To recall a preset station from a FAV page:
1. Press FAV to scroll to the page.
2. Press the preset button. The stored preset station is recalled.
Timeshift
The Timeshift feature automatically begins recording the audio when listening to the radio.
The recording allows playback of content that was missed.
Timeshift stores up to 20 minutes of content. After 20 minutes, it removes the oldest content and continues recording new content.
When listening to a station for more than 20 seconds, press
pause) to stop hearing the information through the speaker. During this paused time, timeshift keeps recording. A status bar displays the length of the recording.
Press
7 to rewind what was stored
into the timeshift.
J (play/
To resume listening to the broadcast at the point where you left off,
J again.
press
Timeshift stops recording and erases the buffer when the station or source is changed.
Alternatively, before turning the vehicle off, press
keeps recording for 20 minutes. If the vehicle is still off after 20 minutes, the system stops recording and all information is lost. If a low battery condition occurs, timeshift stops recording and all information is erased.
J so that timeshift
Radio Data System (RDS)
The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can seek to stations broadcasting the selected type of programming.
Black plate (15,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 15

Satellite Radio

SiriusXM®Satellite Radio Service
Vehicles with an SiriusXM satellite radio tuner and an SiriusXM satellite radio subscription can receive SiriusXM programming.
SiriusXM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM Satellite Radio has a wide variety of programming and commercial-free music, coast-to-coast, and in digital-quality sound. A service fee is required to receive the SiriusXM service. For more information, see www.siriusxm.com or call 1-866-635-2349 in the U.S. or in Canada, www.xmradio.ca or call 1-877-209-0079.
When SiriusXM is active, the channel name and number, category name, song title, and artist displays on the screen.
XM Categories
XM stations are organized in categories.
Removing or Adding Categories
1. Turn the Multifunction knob until Radio displays. Press the Multifunction knob to select Radio or press the Radio screen button to display more options within that feature.
2. Select Show/Hide XM Categories screen button.
3. Press the category screen buttons to show or hide the category.
XM Radio Messages
See XM Radio Messagesin the vehicle owner manual for a list of possible XM messages.

Audio Players

CD/DVD Player

The player can be used for CD, MP3, DVD audio and as a DVD video player.
With the ignition on, insert a CD/ DVD into the slot, label side up. The player pulls it in and begins playing. While playing, the navigation system is available.
The vehicle must be in P (Park) for video to display.
The DVD player is only compatible with DVDs of the appropriate region code that is printed on the jacket of most DVDs.
The system is capable of playing:
.
Most audio CDs
.
CD-R
.
CD-RW
.
MP3 or unprotected WMA formats
.
DVD-Video
Black plate (16,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
16 Infotainment System
.
DVD-Audio
.
DVD-R/RW
.
DVD+R/RW
When playing any compatible recordable disc, the sound quality can be reduced due to disc quality, the method of recording, the quality of the music or video that has been recorded, or the way the disc has been handled.
There can be increased skipping, difficulty in recording tracks, and difficulty in finding tracks/chapters and/or difficulty in loading and ejecting. If these problems occur, check the disc for damage or try a known good disc.
To avoid damage to the CD/DVD player:
.
Do not use scratched or damaged discs
.
Do not apply labels to discs. The labels could get caught in the player.
.
Insert only one disc at a time.
.
Keep the loading slot free of foreign materials, liquids and debris.
If a description label is needed, try labeling the top of the disc using a marking pen.
Loading and Ejecting Discs
To load a disc:
1. Turn the ignition on.
2. Insert a disc into the slot, label side up. The player pulls it in the rest of the way. If the disc is damaged or improperly loaded, there is an error and the disc ejects.
The disc automatically plays once loaded.
Press
Z to eject a disc from the
CD/DVD player.
Playing a CD/DVD
A disc must be loaded to select the source.
When a disc is loaded, the Disc icon displays.
There are two ways to play a CD/DVD:
.
Insert the disc and playback starts automatically.
.
Press SRCE, then press the Disc screen button.
Playing an Audio CD
A track number displays at the beginning of each track. Song, Artist, and Album information displays when available.
Use the following controls to play the disc:
J (Play/Pause): Press to start,
pause, or resume play.
Black plate (17,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 17
6 (Seek Next/Forward):
.
Seeks to the next track.
.
Press and hold to fast forward through a track. Release this button to return to playing speed. Elapsed time displays.
7 (Seek Previous/Reverse):
.
Press to seek to the beginning of the current or previous track. If the track has been playing for less than five seconds, it seeks the previous track. If longer than five seconds, the current track starts from the beginning.
.
Press and hold to fast reverse through a track. Release this button to return to playing speed. Elapsed time displays.
Multifunction Knob: Turn to the right or left to go to the next or previous track.
MENU: Press this knob or touch the CD Menu on the screen to display the track list option, then
select the track from the list. The system plays the selected track and returns to the CD screen.
CD Menu
Press the CD Menu screen button to display the CD Music Menu.
Shuffle: Plays the tracks randomly rather than in sequence. Press again to stop shuffle. A checkmark indicates shuffle is on.
Track List: Displays the list of tracks on the disc. Select the track from the list. The selected track plays and the CD screen displays.
Playing an Audio and Video DVD
To view the DVD video, the vehicle must be in P (Park) for an automatic transmission or the parking brake must be engaged for a manual transmission.
After the DVD is loaded, the menu options display on the DVD screen. The menu options time out and a full screen appears after about 10 seconds. Press anywhere on the navigation system screen or press FAV or SRCE to view the menu screen again.
Black plate (18,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
18 Infotainment System
Use the preset screen buttons or press other appropriate screen buttons to operate the DVD options.
There are two pages of DVD options. Press the arrow button, located in the bottom right corner of the screen, to access the other page. Only the highlighted functions are available for use. Some menu options are only available when the disc is not playing.
DVD Options Full Screen: Select to hide the
DVD options and display the full video image. Press anywhere on the navigation system screen or press FAV or SRCE to re-display the source screen buttons over the video image.
Cursor: Press to access the cursor menu. The arrows and other cursor options allow navigation of the DVD menu options. The cursor menu options are only available if a DVD has a menu.
q, Q, r, R (Arrow Buttons): Press
these arrow buttons to move around the DVD menu.
J (Play/Pause): Press to start,
pause, or resume play.
6 (Seek Next/Forward):
1. Press to seek to the next chapter.
2. Press more than once to continue moving forward through the disc.
3. Press and hold to fast forward through a disc. When fast forward is active, press again to change the speed. Elapsed time displays.
4. Press
J to resume playing.
7 (Seek Previous/Reverse):
1. Press to seek to the beginning of the current or previous chapter. If the chapter has played for less than five seconds, it goes to the previous chapter. If the chapter has played longer than five seconds, the current chapter
is restarted. More than one press continues moving back through the disc.
2. Press and hold to fast reverse through a disc. When fast reverse is active, press again to change the speed. Elapsed time displays.
3. Press
Multifunction Knob: Turn to the right or left to go to the next or previous chapter.
Stop:
1. Press to stop the DVD.
2. To resume playing the DVD from
Shuffle:
1. Select to play the tracks
2. Select again to play sequential.
J to resume playing.
where it stopped, press
randomly rather than in sequence.
This button is available for DVD audio discs.
J.
Black plate (19,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 19
Top Menu: Select to display the
first menu of the DVD. Availability of this feature is dependent on the DVD.
Menu: Select to display the menu for the part of the DVD that is currently playing. Availability of this feature is dependent on the DVD and is not available for audio DVDs.
Keypad:
1. Select to display and search through the chapter, track or menu number screen.
2. On the keypad, enter the title/chapter number or the group/track number.
Search: Select to perform a title search.
Angle:
1. Select to adjust the viewing angle of the DVD, depending on the DVD, while the DVD is playing.
2. Continue pressing to cycle through the viewing angles.
Audio:
1. Select to change the audio stream and the audio language heard, while the DVD is playing.
2. Continue pressing to cycle through the available audio streams or languages, depending on the DVD.
Subtitle:
1. Select while a DVD is playing to view with subtitles on or off or to change the language of the subtitles.
2. Continue pressing to cycle through the available subtitle languages and to turn subtitles off, depending on the DVD playing.
Pan Scan: Pan Scan is a method of adjusting widescreen film images so that they can be proportioned to fit the DVD screen display. Select to turn on Pan Scan.
Error Messages
If Disc Read Error displays and/or the disc comes out, it could be for one of the following reasons:
.
The disc has an invalid or unknown format.
.
The disc is not from a correct region.
.
The disc is very hot. Try the disc again when the temperature returns to normal.
.
The road is very rough. Try the disc again when the road is smoother.
.
The disc is dirty, scratched, wet, or upside down.
.
The air is very humid. Try the disc again later.
.
There could have been a problem while burning the disc.
.
The label might be caught in the CD/DVD player.
Black plate (20,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
20 Infotainment System
If the CD or DVD is not playing correctly, for any other reason, try a known good CD or DVD.
If any error continues, contact your dealer.
MP3
Playing an MP3 CD and DVD
MP3 Format
There are guidelines that must be met, when creating an MP3 disc or the CD might not play.
The guidelines are:
.
Sampling rate: 8 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, and 48 kHz.
.
Bit rates supported: 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, and 320 kbps.
.
Maximum number of folders is 255 with a maximum hierarchy of eight folders.
.
Each folder or album should contain 18 songs or less.
.
Maximum of 1024 files on a disc.
.
Recorded on a CD-R or CD-RW with a maximum capacity of 700 MB.
When an MP3 is loaded in the player, MP3 displays.
If a disc is already loaded, but you are currently on a map screen or listening to a different audio source, press SRCE to switch to the Disc source. A track number appears on the display when each track starts to play.
To play a disc:
J (Play/Pause): Use to start,
pause, or resume play of a loaded disc.
6 (Seek Next/Forward):
1. Press to seek to the next track.
2. Press again to continue moving forward through the disc.
3. Press and hold to advance quickly through playback. Release this button to return to playing speed. Elapsed time displays.
7 (Seek Previous/Reverse):
1. Press to seek to the beginning of the current or previous track. If the track has played for less than five seconds, it goes to the previous track. If longer than five seconds, the current track restarts.
2. Press again to continue moving back through the disc.
Black plate (21,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 21
3. Press and hold this button to reverse quickly through playback.
4. Release this button to return to playing speed. Elapsed time displays.
Multifunction Knob: Turn to go to the next or previous track.
MENU: Press to display the CD Menu. Select the track list option for the current mode/folder. Select the track from the list. The system plays the selected track and returns to the CD screen.
Disc Menu
Press the DISC Menu screen button or press the Multifunction knob while on the Disc audio screen to display the Disc Music Menu.
Select any of the following category buttons on the Disc Music Menu to display the corresponding category screen:
.
Folders/Playlists
Select to view the folders stored on the disc. Select a folder to view the list of all the songs in that folder. There might be a delay before the list displays. Select the song from the list and it begins to play.
.
Track List (All Songs)
Select to view a list of all songs on the disc. There might be a delay before the list displays. Select a song from the list and it begins to play. Songs are
displayed based on the CD burning application folder and file structure used.
.
Artists
Select to view the list of artists that have been stored on the disc. Select an artist name to view a list of all songs by the artist. There might be a delay before the list displays. Select the desired song from the list and it begins to play.
.
Albums
Select to view the albums on the disc. Select the album to view a list of all songs on the album. There might be a delay before the list displays. Select a song from the list and it begins to play.
.
Genres
Select to view the genres on the disc. Select a genre to view a list of all songs of that genre. There might be a delay before the list displays. Select a song from the list and it begins to play.
Black plate (22,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
22 Infotainment System
.
Song Titles
Select to display a list of all songs on the disc. There might be a delay before the list displays. Select a song from the list and it begins to play. Songs are displayed in alphabetical order based on the Song Title ID3 tag, if available.
Root Directory
The root directory is treated as a folder. All files contained directly under the root directory are accessed prior to any root directory folders.
Empty Directory or Folder
If a root directory or folder is empty or contains only folders, the player advances to the next folder in the file structure that contains a compressed audio file. The empty folder(s) are not displayed or numbered.
No Folder
When the CD only contains compressed audio files without any folders or playlists, all files are located under the root folder.
File System and Naming
The displayed song title is taken from the file's ID3 tag. If a song title is not present in the ID3 tag, the radio displays the file name as the track name.
Preprogrammed Playlists
The radio recognizes preprogrammed playlists which were created by WinAmpor MusicMatch, however, there is no editing capability. These playlists are treated as special folders containing compressed audio song files.

Hard Drive Device (HDD)

With a Hard Drive Device (HDD), songs can be recorded.
The type of format supported by the HDD are:
.
MP3
.
MP3-Pro (with spectral brand replication).
.
WMA
.
Audible.com
.
M4A
Songs can be recorded from a CD player or a mass media storage device connected by a USB connector.
For optimal recording performance make sure the disc is clean with no damage, otherwise the system might partically record the track.
Black plate (23,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 23
To select the hard drive audio source:
Press SRCE, cycle through the available audio sources until HDD displays, then press the HDD source button. You can also touch the audio page to toggle to HDD, then press HDD source button.
Recording from a CD to the Hard Drive
The speed of the recording increases if you are listening to another source while recording.
To record all tracks from the disc:
1. Load a CD.
2. Press SRCE until the CD screen displays. Press the CD Menu to select All Songs.
3. A confirmation displays. Press the REC (record) screen button.
4. Press All Songs to record all tracks. A progress bar displays.
To record selected tracks from the disc:
1. Load a CD until the CD screen displays.
2. Press
6, 7 , or press CD Menu
to select a song for recording.
3. Press REC.
4. A confirmation displays.
5. Select the song name to record. A progress bar displays.
Recording from a USB Device to the Hard Drive
To copy all tracks from the USB device:
1. Connect a USB device or press SRCE until the disc screen displays the USB screen.
2. Press REC.
3. A confirmation displays.
4. Select All Songs to copy all tracks. A progress bar displays.
To record selected tracks:
1. Connect a USB device.
2. Press SRCE until the disc screen displays the USB screen.
3. Press
6, 7 , or press the USB
Menu to select a song for recording.
Black plate (24,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
24 Infotainment System
4. Press REC.
5. A confirmation displays.
6. Select the song name to record. A progress bar displays.
Duplicate Content
When the record function is started, there is a check to verify that it does not already exist on the hard drive. If the entire content of the CD exists on the hard drive, it will not record the content.
If it is determined that some or none of the content exists, then only that content will be copied to the hard drive.
If the same file is recorded from USB and CD, it is possible to have duplicate tracks.
CD Eject
If the CD ejects before the recording process completes, only tracks that have been completely recorded are stored to the hard drive, incomplete tracks are discarded.
Power Mode
If the system is turned off during a CD or USB recording process, it stops. When the radio is turned back on, the recording process does not resume automatically.
Playing Hard Disc Drive Content
To operate hard drive functions while the HDD source is active, use the following buttons or touch-sensitive buttons:
J (Play/Pause): Press to start,
pause or resume play of the current media source.
6 (Seek Next/Forward):
1. Press to seek to the next track.
2. Press and hold to advance quickly through playback.
3. Release this button to return to playing speed. Elapsed time displays.
7 (Seek Previous/Reverse):
1. Press to seek to the beginning of the current or previous track. If the track has been playing for less than five seconds, the previous track plays. If longer than five seconds, the current track restarts.
2. Press and hold this button to reverse quickly through playback. Release this button to return to playing speed. Elapsed time appears on the display.
Multifunction Knob: Turn to the right or left to go to the next or previous track.
Black plate (25,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 25
MENU: Press to display the track
list. For example, if in artist mode it only displays the track by the selected artist. Select the desired track from the list. The system plays the selected track and returns to the HDD screen.
DEL (Delete): Select to delete a song from the hard drive. Select the song from the HDD Menu screen to delete.
To delete an entire list of Artists, Albums, or Genres, select the category from the HDD Menu screen.
HDD Menu
From the HDD screen, press the HDD Menu screen button on the HDD screen to display the HDD Music Menu.
Select any of the following buttons on the HDD Menu:
Shuffle: Press to play the tracks randomly rather than in sequence.
More Like This: Press to use Gracenote music recognition technology and related data to generate a list of songs similar to the current song. Select a song from the list.
This feature is only available with songs recorded to the HDD from Audio CDs, not MP3s and other compressed audio.
When recording CDs to the HDD there might be delays to build the list until all the files are compressed.
Folders/Playlists:
1. Press to view the folders/ playlists on the hard drive.
2. Select a folder/playlist to view a list of all songs in the folder/ playlist.
3. Select a song from the list. Once selected, Folders/Playlists Mode displays.
Artists:
1. Press to view the artists on the hard drive.
2. Select an artist to view a list of all songs by that artist.
3. Select a song from the list. Once selected, Artist Mode displays.
Albums:
1. Press to view the albums on the hard drive.
2. Select an album to view a list of all songs on the album.
3. Select a song from the list. Once selected, Album Mode displays.
Black plate (26,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
26 Infotainment System
All Songs:
1. Press to view a list of all songs on the hard drive.
2. Select a song from the list. Once selected, All Songs Mode displays.
Genres:
1. Press to view the genres on the hard drive.
2. Select a genre to view a list of all songs of that genre.
3. Select a song from the list. Once selected, Genre Mode displays.
Recently Saved: Press to view a list of the 50 most recently saved songs to the HDD. Once selected, Recently Saved Mode displays.
Saving HDD Favorites
During HDD playback, to save the current song playing to a category preset:
.
Press FAV until the FAV playlist category displays.
.
Press and hold a preset button on the bottom of the screen until the Saved to Favorites message displays.
To save an entire Artist, Album, or Genre to a FAV category preset:
.
Press FAV until the correct FAV category appears.
.
Press and hold a preset button on the bottom of the screen.
Playing HDD Favorites
Favorites can be played two different ways.
1. Press FAV until the appropriate FAV HDD category displays.
Press a preset button at the bottom of the HDD screen.
2. Select FAV from the HDD Menu. Favorite Artist, Album and Genre are in the corresponding list.
USB Host Support
The USB connector uses the USB 2.0.
USB Supported Devices
.
USB flash sticks or pen drives.
.
Portable USB Hard Drives. Special care needs to be taken related to the power source of these devices (USB bus powered vs. external power.)
.
Portable media adapters that support SD Flash, Compact Flash, or SD Micro.
Depending on the USB mass storage device, some devices might not be recognized.
Music can be played directly from the USB device and controlled through MP3 control functions and menu.
Black plate (27,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 27
Playing from USB
A USB Mass Storage device can be connected to the USB port to copy compressed audio files onto the hard drive. Content can also be played directly from the USB device.
The USB mass storage limit is 20 Gb. For the infotainment system to read the data for songs beyond that limit would depend on the manufacturer and data format.
The USB port is located in the center console.
The USB icon displays when the USB device connected.
To play a USB device:
.
Connect the USB and it begins to play.
.
Press SRCE, then press the USB screen button.
While the USB source is active, use the following to operate USB function:
J (Play/Pause): Press to start,
pause, or resume play of the current media source.
6 (Seek Next/Forward):
1. Press to seek to the next track.
2. Press and hold to advance quickly through playback.
3. Release the button to return to playing speed. Elapsed time displays.
7 (Seek Previous/Reverse):
1. Press to seek to the beginning of the current or previous track. If the track has been playing for less than five seconds, the
previous track plays. If playing longer than five seconds, the current track restarts.
2. Press and hold to reverse quickly through playback.
3. Release the button to return to playing speed. Elapsed time displays.
Multifunction Knob: Turn to the right or left to go to the next or previous track.
MENU: Turn this knob to display the track list. For example, if in artist mode it only displays the track by the selected artist. Select the desired track from the list. The system plays the selected track and returns to the USB screen.
Black plate (28,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
28 Infotainment System
USB Menu
Press the USB Menu screen button or press the Multifunction knob while on the USB audio screen to display the USB Music Menu.
Select any of the following buttons on the USB Menu:
Shuffle:
1. Press to play the tracks randomly rather than in sequence.
2. Select again to stop this function.
Folders/Playlists:
1. Press to view the playlists stored on the USB.
2. Select a folder/playlist to view a list of all songs in the folder/ playlist.
3. Select a song from the list. Once selected, Folder/Playlist Mode displays.
Track List:
1. Press to view the list of tracks stored on the USB.
2. Select a track from the list.
Artists:
1. Press to view the artists stored on the USB.
2. Select an artist to view a list of all songs by the artist.
3. Select a song from the list. Once selected, Artist Mode displays.
Albums:
1. Press to view the albums stored on the USB.
2. Select an album to view a list of all songs on the album.
3. Select a song from the list. Once selected, Album Mode displays.
All Songs:
1. Press to view a list of all songs stored on the USB.
2. Select a song from the list. Once selected, All Songs Mode displays.
Genres:
1. Press to view the genres stored on the USB.
2. Select a genre to view a list of all songs of that genre.
3. Select a song from the list. Once selected, Genre Mode displays.
Eject USB: Press when USB is to be removed. If the USB is disconnected without selecting Eject USB, the files could become corrupted.
Black plate (29,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
Infotainment System 29
Playing from an iPod
®
This feature supports the following iPod models; Made for:
.
iPod touch (4th generation)
.
iPod touch (3rd generation)
.
iPod touch (2nd generation)
.
iPod touch (1st generation)
.
iPod classic
.
iPod with video
.
iPod nano (6th generation)
.
iPod nano (5th generation)
.
iPod nano (4th generation)
.
iPod nano (3rd generation)
.
iPod nano (2nd generation)
.
iPod nano (1st generation)
.
iPhone 4
.
iPhone 3GS
.
iPhone 3G
.
iPhone
For proper operation, make sure the iPod has the latest firmware from
®
. iPod firmware can be
Apple updated using the latest iTunes
®
application.
For more information, visit www.apple.com/itunes
Recording from the iPod to the HDD is not supported. Media must be recorded using a USB mass storage device.
To connect and control an iPod, connect one end of the standard iPod USB cable to the iPod's dock connector. Connect the other end to the USB port in the center console.
iPod music information displays on the radios display and begins playing through the vehicles audio system.
The iPod battery recharges automatically while the ignition is on or in the accessory position. When the ignition is turned off while an iPod is connected using the iPod USB cable, the iPod battery stops charging and the iPod automatically turns off.
If the iPod is a model that is not supported, it can still be listened to in the vehicle by connecting it to the Auxiliary Input Jack using a standard 3.5 mm (1/8 in) stereo cable. See Auxiliary Devices on page 34 for more information.
Black plate (30,1)
Chevrolet Full-Size Truck and Van Navigation System - 2013 - CRC - 9/25/12
30 Infotainment System
iPod Menu
Select any of the following buttons on the iPod Music Menu to display the corresponding screen:
Shuffle:
1. Press this button to play the tracks randomly rather than in sequence.
2. Select the button again to stop this function.
Playlists:
1. Press this button to view the playlists that have been stored on the iPod.
2. Select a playlist name to view a list of all songs in the playlist.
3. Select the desired song from the list. Once a song has been selected Playlist Modeappears on the iPod main screen to show that music is playing from a playlist.
Artists:
1. Press this button to view the artists that have been stored on the iPod.
2. Select an artist name to view a list of all songs by the artist.
3. Select the desired song from the list. Once a song has been selected Artist Modeappears on the iPod main screen to show that music is being played from a specific artist.
Albums:
1. Press this button to view the albums that have been stored on the iPod.
2. Select an album name to view a list of all songs on the album.
3. Select the desired song from the list. Once a song has been selected Album Modeappears on the iPod main screen to show that music is being played from a specific album.
All Songs:
1. Press this button to view a list of all songs stored on the iPod.
2. Select the desired song from the list. Once a song has been selected All Songs Mode appears on the iPod main screen to show that music is being played from the All Songs category.
Genres:
1. Press this button to view the genres that have been stored on the iPod.
2. Select a genre name to view a list of all songs of that genre.
Loading...
+ 76 hidden pages