This manual describes features that
may or may not be on the vehicle
because of optional equipment that
was not purchased on the vehicle,
model variants, country
specifications, features/applications
The names, logos, emblems,
slogans, vehicle model names, and
vehicle body designs appearing in
this manual including, but not limited
to, GM, the GM logo, CHEVROLET,
the CHEVROLET Emblem, and
CITY EXPRESS are trademarks
and/or service marks of General
Motors LLC, its subsidiaries,
affiliates, or licensors.
For vehicles first sold in Canada,
substitute the name “General
Motors of Canada Limited” for
Chevrolet Motor Division wherever it
appears in this manual.
Litho in U.S.A.
Part No. 23433684 B Second Printing
that may not be available in your
region, or changes subsequent to
the printing of this owner manual.
Refer to the purchase
documentation relating to your
specific vehicle to confirm the
features.
Keep this manual in the vehicle for
quick reference.
Canadian Vehicle Owners
Propriétaires Canadiens
A French language manual can be
obtained from your dealer, at
www.helminc.com, or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
savant:
Helm, Incorporated
Attention: Customer Service
47911 Halyard Drive
Plymouth, MI 48170
Using this Manual
To quickly locate information about
the vehicle, use the Index in the
back of the manual. It is an
alphabetical list of what is in the
manual and the page number where
it can be found.
Warning messages found on vehicle
labels and in this manual describe
hazards and what to do to avoid or
reduce them.
Danger
{
Danger indicates a hazard with a
high level of risk which will result
in serious injury or death.
Warning
{
Warning indicates a hazard that
could result in injury or death.
A circle with a slash through it is a
safety symbol which means “Do
Not,” “Do not do this,” or “Do not let
this happen.”
Symbols
The vehicle has components and
labels that use symbols instead of
text. Symbols are shown along with
the text describing the operation or
information relating to a specific
component, control, message,
gauge, or indicator.
M : This symbol is shown when
you need to see the owner manual
Caution
{
Caution indicates a hazard that
could result in property or vehicle
damage.
for additional instructions or
information.
* : This symbol is shown when
you need to see a service manual
for additional instructions or
information.
Vehicle Symbol Chart
Here are some additional symbols
that may be found on the vehicle
and what they mean. For more
information on the symbol, refer to
the Index.
9 : Airbag Readiness Light
H or ! : Antilock Brake
door. The hazard warning flashers
flash once if all doors are closed
with the ignition switch in any
position except ON.
The interior lamp comes on and the
lamp timer activates for 30 seconds
when the interior lamp switch is in
the DOOR position with the ignition
switch in any position except ON.
The interior lamp can be
Keyless Access
Q : Press to lock all doors.
The hazard warning flashers flash
twice and the horn chirps once to
indicate all doors are locked.
If a door is open and
the doors will lock but the horn will
not beep and the hazard warning
flashers will not flash. The horn may
or may not beep. See “Silencing the
Horn Sound Feature” under Remote
Keyless Entry (RKE) System
Operation on page 2-3.
Q is pressed,
immediately turned off by inserting
the key into the ignition switch and
placing the ignition switch in ON or
START, by locking the doors with
the RKE transmitter, by pressing the
door switch, or by pressing OFF on
the interior lamp switch.
K again within five seconds
Press
to unlock all remaining doors. The
hazard warning flashers flash once
if all doors are completely closed.
When
K is pressed, all doors will
automatically lock within one minute
unless a door is opened, the ignition
switch is turned from OFF to ON,
or
Q is pressed.
7 : Press and hold 7 to sound the
panic alarm. Press any button on
the RKE transmitter to cancel the
panic alarm.
See Keys on page 2-1 and Remote
Keyless Entry (RKE) System
Operation on page 2-3.
Door Locks
Manual Door Locks
Lock and unlock the door from the
outside using the key or the Remote
Keyless Entry (RKE) transmitter,
if equipped. From the inside, slide
the manual lever on the door
forward to lock and rearward to
unlock.
On the front doors, press Q or K on
the power door lock switch to lock or
unlock the doors.
See Power Door Locks on page 2-7.
Windows
Power Windows
The power window controls (1) are
on the front doors. The driver door
also has a control (2) to operate the
front passenger window.
Press or pull up on the switch to
lower or raise the window.
Express-Up/Down
If equipped, the front windows have
an express feature that allows the
window to be raised or lowered
without holding the switch. Press or
pull the switch fully and release it to
activate the express feature.
This mode can be canceled by
briefly pressing or pulling the switch.
See Power Windows on page 2-14.
Seat Adjustment
Seat Adjustment
To adjust the seat:
1. Lift the bar to unlock the seat.
2. Slide the seat to the desired
position and release the bar.
3. Try to move the seat back and
forth to be sure the seat is
locked in place.
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position.
5. Fold the seatback flat over the
seat cushion.
To raise the seatback:
1. Raise the seatback and push it
rearward.
2. Pull up on the recline lever and
lean the seatback to the upright
seating position. See RecliningSeatbacks on page 3-4.
3. Push and pull on the seatback to
make sure it is locked in place.
See Folding Seatback on page 3-6.
See Head Restraints on page 3-2
and Seat Adjustment on page 3-3.
Safety Belts
Refer to the following sections for
important information on how to use
safety belts properly:
.
Safety Belts on page 3-8.
.
How to Wear Safety Belts
Properly on page 3-9.
.
Lap-Shoulder Belt on page 3-10.
.
Lower Anchors and Tethers for
Children (LATCH System) on
page 3-38.
The passenger sensing system will
turn off the front outboard
passenger frontal airbag under
certain conditions. No other airbag
is affected by the passenger
sensing system. See PassengerSensing System on page 3-22.
The passenger airbag status
indicator is under the climate
controls and is visible when the
vehicle is started. See Passenger
Airbag Status Indicator on
page 5-10.
Mirror Adjustment
Interior Mirror
Adjust the rearview mirror for a clear
view of the area behind your
vehicle.
Push the tab forward for daytime
use and pull it rearward for
nighttime use to avoid glare of the
headlamps from behind.
See Manual Rearview Mirror onpage 2-13.
Exterior Mirrors
If equipped with manual outside
mirrors, adjust by pressing up,
down, left, or right on the mirror to
have a clear view of objects
behind you.
If equipped with power outside
mirrors, adjust by selecting the left
or right mirror (1) and then use the
control pad (2) to move each mirror
to the desired position. See PowerMirrors on page 2-13.
Interior Lighting
The dome lamp and reading lamps
are in the overhead console.
The dome lamp operates in any
ignition switch position.
The dome lamp switch has three
positions, press the switch to adjust
the settings.
Press (1) to turn the lamp off, even
when a door is open. When the
switch is in the (2) position, the lamp
comes on when a door is opened.
Press (3) to turn the lamp on.
Reading Lamps
Press (1) to turn the reading lamp
on or (2) to turn the reading
lamp off.
See Dome Lamps on page 6-4.
Exterior Lighting
The exterior lamp control is on the
turn signal lever on the left side of
the steeringcolumn.
There are three positions:
OFF: Turns all the lamps off,
except the Daytime Running
Lamps (DRL).
; : Turns on the parking lamps
including all lamps, except the
headlamps.
5 : Turns on the headlamps
together with the parking lamps and
instrument panel lights.
The base radio information is
included in this manual. See the
infotainment manual for information
on the uplevel radio, audio player,
phone, navigation system, and
voice recognition. There is also
information on settings.
Radio(s)
The ignition most be in ACC/
ACCESSORY or RUN/START.
PUSH/PWR: Press to turn the
system on and off.
VOL: Turn to increase or decrease
the volume.
AM: Press to change to AM
stations.
FM: Press to change to FM
stations and press to change
between FM1 and FM2.
CD: Press to change to play a CD.
AUX: Press to change to an
auxiliary device.
> : Press to mute and unmute the
audio.
r SEEK/TRACK q : Radio:
Press to fast seek or scan stations.
Q TUNE/FF-REW/FOLDER R :
Press to seek or scan one station at
a time.
For more information about these
and other radio features, see
Infotainment on page 7-1.
Storing a Favorite Station
Up to 18 stations (six FM1, six FM2,
and six AM), can be programmed on
the six numbered buttons.
For more information on storing a
favorite station, see Operation onpage 7-4.
Setting the Clock
For detailed instructions on setting
the clock for your specific audio
system, see Clock on page 5-3.
Portable Audio Devices
This vehicle has an auxiliary input
jack on the lower right side of the
faceplate. External devices such as
an iPod
player, cassette player, or CD
changer can be connected to the
auxiliary port using a 3.5 mm
(1/8 in) input cable.
This input jack is not an audio
output; do not plug headphones into
the front auxiliary input jack.
See Auxiliary Jack on page 7-9.
Bluetooth
If equipped with a Bluetooth system,
it allows users with a
Bluetooth-enabled cell phone to
make and receive hands-free calls
using the vehicle’s audio system
and controls.
The Bluetooth-enabled cell phone
must be paired with the Bluetooth
system before it can be used in the
vehicle. Not all phones will support
hold to accelerate. If cruise control
is already active, use to increase
vehicle speed.
COAST/SET: Press briefly to set
the speed and activate cruise
control, or press and hold to
decelerate. If cruise control is
already active, use to decrease
vehicle speed.
CANCEL: Press to disengage
cruise control without erasing the
set speed from memory.
See Cruise Control on page 9-28.
Trip Computer
The vehicle may have a trip
computer. It provides the driver with
driving information such as the
driving distance for the remaining
fuel, average fuel economy, and
instant fuel economy.
Use the trip odometer reset stem in
the cluster to cycle through the
available trip computer displays.
See Trip Computer on page 5-20.
Rear Vision
Camera (RVC)
If equipped, RVC displays a view of
the area behind the vehicle, on the
infotainment system display, when
the vehicle is shifted into
R (Reverse).
See Rear Vision Camera (RVC) onpage 9-31.
Parking Assist
If equipped, this system uses
sensors on the rear bumper to
assist with parking and avoiding
objects while in R (Reverse).
It operates at speeds less than
5 km/h (3 mph). Rear Parking Assist
(RPA) uses audible beeps to
provide distance and system
information.
Keep the sensors on the vehicle's
rear bumper clean to ensure proper
operation.
See Parking Assist on page 9-30.
Power Outlets
The accessory power outlets can be
used to plug in electrical equipment,
such as a cell phone or an MP3
player.
The vehicle may have two
accessory power outlets:
.
Near the bottom of the center
stack.
.
On the rear of the center floor
console.
Remove the cover to access and
replace when not in use.
The vehicle has a Traction Control
System (TCS) and an Electronic
Stability Control system that assists
with directional control of the vehicle
in difficult driving conditions. Both
systems turn on automatically every
time the vehicle is started.
.
To turn off the TCS and
Electronic Stability Control
systems, press and release the
TCS/Electronic Stability Control
g on the instrument
button
panel to the left of the steering
wheel. The
on in the instrument cluster.
.
Press and release the TCS/
Electronic Stability Control
button again to turn the TCS and
Electronic Stability Control
g indicator will come
systems back on. The
indicator will turn off in the
instrument cluster.
See Traction Control/ElectronicStability Control on page 9-25.
Tire Pressure Monitor
This vehicle may have a Tire
Pressure Monitor System (TPMS).
The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label. See
Vehicle Load Limits on page 9-9.
The warning light will remain on until
the tire pressureiscorrected.
g
The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the
tire pressures are getting low and
the tires need to be inflated to the
proper pressure.
The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.
See Tire Pressure Monitor Systemon page 10-36.
Driving for Better Fuel
Economy
Driving habits can affect fuel
mileage. Here are some driving tips
to get the best fuel economy
possible.
Leaving children in a vehicle with
the ignition key is dangerous and
children or others could be
seriously injured or killed. They
could operate the power windows
or other controls or make the
vehicle move. The windows will
function with the keys in the
ignition, and children or others
could be caught in the path of a
closing window. Do not leave
children in a vehicle with the
ignition key.
The key is used for the ignition and
all door locks.
A key number plate is supplied with
the keys. Record the key number
and keep it in a safe place not in the
vehicle. If the key is lost, see a
dealer for duplicates by using the
key number. Key numbers are not
recorded so it is very important to
keep track of the key number plate.
Key Access
See your dealer if a replacement
key or additional key is needed.
Keyless Access
If it becomes difficult to turn a key,
inspect the key blade for debris.
Periodically clean with a brush
or pick.
Remote Keyless Entry
(RKE) System
See Radio Frequency Statement on
page 13-12.
If there is a decrease in the RKE
operating range:
.
Check the distance. The
transmitter may be too far from
the vehicle.
.
Check the location. Other
vehicles or objects may be
blocking the signal.
.
Check the transmitter's battery.
See “Battery Replacement” later
in this section.
.
If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.
If equipped, the RKE transmitter
functions work up to 10 m (33 ft)
away from the vehicle.
Other conditions can affect the
performance of the transmitter. See
Remote Keyless Entry (RKE)
System on page 2-2.
Q (Lock): Press to lock all doors.
The hazard warning flashers flash
twice and the horn chirps once to
indicate all doors are locked.
If a door is open and
the doors will lock but the horn will
not beep and the hazard warning
flashers will not flash. The horn can
be disabled. See “Silencing the
Horn Sound Feature” in this section.
Q is pressed,
K (Unlock): Press once to unlock
the driver door. The hazard warning
flashers flash once if all doors are
closed with the ignition switch in any
position except ON.
K again within five seconds
Press
to unlock all remaining doors. The
hazard warning flashers flash once
if all doors are completely closed.
The interior lamp comes on and the
lamp timer activates for 30 seconds
when the interior lamp switch is in
the DOOR position with the ignition
switch in any position except ON.
The interior lamp can be
immediately turned off by inserting
the key intotheignitionswitch and
placing the ignition switch in ON or
START, by locking the doors with
the RKE transmitter, by pressing the
door lock switch, or by pressing
OFF on the interior lamp switch.
K is pressed, all doors will
When
automatically lock within one minute
unless a door is opened, the ignition
switch is turned from OFF to ON,
or
Q is pressed.
7 (Panic Alarm): Press and hold
7 to sound the panic alarm. Press
any button on the RKE transmitter
to cancel the panic alarm. The panic
alarm will not work if the key is in
the ignition.
Auto Relock
When
K is pressed, all doors will
automatically lock within one minute
unless a door is opened, the ignition
switch is turned from OFF to ON,
The Horn Sound feature can be
deactivated using the RKE
transmitter.
Press and hold
two seconds to deactivate the horn
sound. The hazard warning flashers
will flash three times to confirm that
the horn sound feature has been
deactivated.
Press and hold again for at least
two seconds to activate the horn
sound. The hazard warning flashers
will flash once and the horn will
sound once to confirm that the horn
sound is activated. The horn sound
will not deactivate if the alarm is
triggered.
The RKE transmitter buttons will not
operate when the key is in the
ignition.
Q and K for at least
Programming Transmitters to
the Vehicle
Only RKE transmitters programmed
to the vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
When the replacement transmitter is
programmed to the vehicle, all
remaining transmitters must also be
programmed. Any lost or stolen
transmitters no longer work once the
new transmitter is programmed.
Each vehicle can have up to
five transmitters programmed to it.
Battery Replacement
Caution
{
When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.
To replace the battery:
1. Remove the screw.
2. Separate the transmitter with a
flat, thin tool.
.
Carefully insert the tool into
the notch located along the
parting line of the transmitter.
.
Twist the tool until the
transmitter is separated.
Passengers, especially
children, can easily open the
doors and fall out of a moving
vehicle. When a door is
locked, the handle will not
4. Insert the new battery, positive
side facing the bottom of the
case. Replace with a CR1620 or
equivalent battery.
5. Close the lid and install the
screw securely.
open it. The chance of being
thrown out of the vehicle in a
crash is increased if the
doors are not locked. So, all
passengers should wear
safety belts properly and the
doors should be locked
whenever the vehicle is
driven.
.
Young children who get into
unlocked vehicles may be
unable to get out. A child can
be overcome by extreme heat
and can suffer permanent
Warning
(Continued)
Warning (Continued)
injuries or even death from
heat stroke. Always lock the
vehicle whenever leaving it.
.
Outsiders can easily enter
through an unlocked door
when you slow down or stop
the vehicle. Locking the doors
can help prevent this from
happening.
Manual Door Locks
Lock and unlock the doors from the
outside using the key or the Remote
Keyless Entry (RKE) transmitter,
if equipped.
If the vehicle is equipped with
Keyless Entry, see Remote Keyless
Entry (RKE) System Operation on
page 2-3.
Front Doors
From the outside, turn the key
toward the front of the vehicle to
lock and toward the rear to unlock.
From the inside, move the inside
lock knob inward to the lock
position, then close the door. To
unlock, move the inside lock knob
outward to the unlock position.
Sliding Doors
From the outside, turn the key
toward the front of the vehicle to
lock and toward the rear to unlock.
From the inside, slide the lever
forward (2) to lock and rearward (1)
to unlock.
Back Door
Turn the key toward the right of the
vehicle to lock. Turn the key toward
the left of the vehicle to unlock.
From the inside, push the lever
inward to lock (1) or pull outward to
unlock (2).
From the outside, if equipped, turn
the key toward the front of the
vehicle to lock all doors. Turn the
key rearward one time to unlock that
door. Turn the key rearward again
within five seconds to unlock all
doors.
From the inside, press Q or K on
the power door lock switch to lock or
unlock the doors.
Automatic Door Locks
The doors will lock automatically
when the vehicle speed reaches
24 km/h (15 mph).
To unlock the doors:
.
Press K on a door.
.
Shift the transmission into
P (Park).
The doors will unlock automatically
when the ignition is placed in the
OFF position or when the key is
removed from the ignition.
To deactivate or activate automatic
door unlock:
1. Close all doors.
2. Place the ignition in the ON
position.
3. Within 20 seconds of performing
Step 2, press and hold
power door lock switch for more
than five seconds.
K on the
4. When activated, the hazard
warning flashers will flash twice.
When deactivated, the hazard
warning flashers will flash once.
5. The ignition switch must be
placed in the OFF and ON
position again between each
settings change.
Lockout Protection
When locking is requested with the
driver door open and the key in the
ignition, all the doors will lock and
then the driver door will unlock.
Loading...
+ 267 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.