CHENYI ELECTRONICS W10G, W08G, W06G, W04G, W02G Datasheet
...
CE W005G THRU W10G
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
FEATURES
Ideal for printed circuit board
High surge capcability 60A peak
High case dielectric strength
MECHANICAL DATA
. Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
. Polarity: Polarity symbol marked on body
. Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL W005G W01G W02G W04G W06G W08G W10G
Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000
Maximum RMS Voltage Vrms 35 70 140 280 420 560 700
Maximum DC blocking Voltage Vdc 50 100 200 400 600 800 1000
Maximum Average Forward Rectified
current at Ta=50
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
forward current 1.5A
Maximum DC Reverse Voltage Ta=25
at rated DC blocking voltage Ta=125
Tyoical Junction Capacitance(Note 1)
Operating Temperature Range
Storage and operation Junction Temperature
Note:
1.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
If(av) A
Ifsm A
Vf V
Ir m A
Cj 24 pF
Tj
Tstg
1.5
50
1.0
10.0
1.0
-55 to +125
-55 to +150
units
v
v
v
A
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2
CE W005G THRU W10G
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
RATINGS AND CHARACTERISTIC CURVES W005G THRU W10G
FIG.1-DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK
OUTPUT RECTIFIED CURRENT FORWARD SURGE CURRENT PER LEG
FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS
PER LEG PER LEG
FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
PER LEG
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 2 of 2
Loading...