CHENYI ELECTRONICS S2A, S2J, S2D, S2B, S2G Datasheet
...
CE S2A THRU S2M
CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.5Amperes
FEATURES
. For surface mounted applications
. Glass passivated junction
. Low profile package
. Built-in strain relief , ideal for automated placement
. Plastic package has Underwrites Laboratory Flammability
Classification 94V-0
. High temperature soldering guaranteed: 250
MECHANICAL DATA
. Case: JEDEC SMA(DO-214AA) molded plastic
. Terminals: Plated axial leads solderable per MIL-STD-750,method 2026
. Polarity: Color band denotes cathode end
. Mounting Position: Any
. Weight: 0.003 ounce, 0.093 gram
/10 seconds, at terminals
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive)
load. For capacitive load,derate current by 20%)
Symbols S2A S2B S2D S2G S2J S2K S2M Units
Maximum Recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage V
Maximum DC blocking voltage V
Maximum average forward rectified
current at TL=100
Peak forward surge current (8.3ms
half sing wave superimposed on rated load
(JEDEC method)
Maximum instantaneous forward voltage at 1.0 A VF Volts
Maximum reverse recovery time(Note 1)
current at rated DC Blocking Voltage
Typical Thermal Resistance( Note 2)
Typical reverse recovery time(Note 3) Trr S
Typical junction capacitance(Note 1)
TL=100
T
T
=25
A
=125
A
RMS 35 70 140 280 420 560 700 Volts
DC 50 100 200 400 600 800 100 Volts
I(AV) 1.5 Amp
FSM Amps50.0
I
1.15
1.0
125
16.0
53.0
2.0
30.0
R
R
I
R
JL
JA
A
/W
pF
Operating and storage temperature range
J TSTG
T
-55 to +150
Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC.
2.Thermal resistance from junction to ambient and from junction to lead mounted on 0.2 X 0.2"(5.0 X 5.0mm)
copper pad areas. 3.Reverse recovery test conditions:IF=0.5A,IR=1.0A,Irr=0.25A.
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2
CE S2A THRU S2M
CHENYI ELECTRONICS SURFACE MOUNT GALSS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.5Amperes
RATINGS AND CHARACTERISTIC CURVES S2A THRU S2M
FLG.1-FORWARD CURRENT FIG.2-TYPICAL INSTANTANEOUS FORWARD
DERATING CURVE CHARACTERISTICS
FIG.3-MAXIMUM NON-REPETITIVE
FORWARD SURGE CURRENT FIG.4-TYPICAL REVERSE CHARACTERISTICS
FIG.5-TYPICAL JUNCTION CAPACITANCE
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 2 of 2
Loading...