CE RB151 THRU RB157
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
FEATURES
Ideal for printed circuit board
Reliable low cost construction
Surge overload rating:50 A peak
MECHANICAL DATA
. Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
.
Polarity: Polarity symbol marked on body
.
Mounting position: any
.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL RB 151 RB 152 RB 153 RB 154 RB 155 RB 156 RB 157
Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000
Maximum RMS Voltage Vrms 35 70 140 280 420 560 700
Maximum DC blocking Voltage Vdc 50 100 200 400 600 800 1000
Maximum Average Forward Rectified
current at Ta=25
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
forward current 1.0A
Maximum DC Reverse Voltage Ta=25
at rated DC blocking voltage Ta=100
Tyoical Junction Capacitance
Operating Temperature Range
Storage and operation Junction Temperature
Note:
1.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
If(av) A
Ifsm A
Vf V
Ir m A
Cj 24 pF
Tj
Tstg
1.5
50
1.1
10.0
1.0
-55 to +125
-55 to +150
units
v
v
v
A
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 1 of 2
CE RB151 THRU RB157
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.5A
RATINGS AND CHARACTERISTIC CURVES RB151 THRU RB157
FIG.1-MAXIMUM NON-REPETITIVE PEAK FIG.2-TYPICAL FORWARD CURRENT
FORWARD SURGE CURRENT PER LEG DERATING CURVE
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD
Page 2 of 2