Cheng Uei Precision Industry HS5CN Users Manual

H550

BLESH

nu

)

Connection > Bluetooth Li

Handsfree > Look for Devices.

e phone lists Bluetooth devices it f

Select

M

Select

OK

r your heads

y

our phone

and

ake and re

the phone, dial the number you want to

UR H550

and

uide

re turned o

ue tur

the Motorola charger int

headset.

e indicator light turns red when the

attery is charging. It may take up to 1

nection >

s Bluetooth feature is off by de

Motorola phones (at the main menu

motorola

Bluetooth

®

Handsfree Headset

Get connected in 4 quick steps.

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.

Take a moment before you get started to
familiarize yourself with your new
H550 Headset.

Call Button/

Volume
Buttons

Slide Switch

Speaker
(on reverse
side)

Multi-Color
Indicator Light

Microphone

1

Charging

Plug the Motorola charger into the end of

1

the headset.

The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns off.

Disconnect the charger.

2

Note: Headset is not functional while charging.

CHARGE

Your Headset's Battery

Por t

2

START BLUETOOTH

FEATURE

Your Phone

Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.

For most Motorola phones (at the main menu):



Press (

1

Bluetooth Link > Setup.

2

Scroll to Power.

3

Select Change.

Scroll to On.

4

5

Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.

Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.

Menu) > Settings > Connection >

3

Before you can use your headset, you must pair
(link) it with your phone.

Step A - PUT THE HEADSET IN PAIRING
MODE

The headset indicator light will be steadily lit in
blue when in pairing mode. To place the
headset in pairing mode, simply slide the
switch toward the microphone (ON position).
After a few moments, the indicator light
becomes steadily lit in blue.

Note: If the headset has previously been paired with other
devices, you need to turn those devices off before sliding the
switch to the ON position. If you already slid the switch to the
ON position, toggle the switch OFF and ON (after ensuring
devices are turned off) to enter pairing mode.

If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.

PAIR

Your Headset

Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196

www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)

Guide Number: 6809504A24-O

MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.

© Motorola, Inc. 2006.

PAIR

3

Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (

1

CONTINUED

Your Phone



Menu) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.

The phone lists Bluetooth devices it finds.

Select Motorola H550.

2

Select OK or Ye s to pair your headset with

3

your phone.

4

Enter the passkey: 0000
Select OK.

5

When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing blue.

Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.

4

1

2

3

TEST AND USE

Your phone and headset are now paired and
ready to make and receive calls.
To make a call:

Place the headset over your ear.

On the phone, dial the number you want to
call and press SEND key on your phone.

If your phone and headset are successfully
paired, you will hear ringing on the headset.

After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.

To save battery power, turn OFF the
headset when you don't use it for an
extended time by sliding the switch
towards the charging plug.

USING YOUR H550

See

Features and

Functions Guide

on the reverse side

for information on

using your H550

TROUBLESHOOTING

My headset will not enter pairing mode.

Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is flashing in blue, turn off the other device
and wait for 10 seconds. The indicator light
becomes steadily lit in blue indicating the
headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).

My headset worked before but now it's not
working.

Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).

Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport

Features and

Functions Guide

H550

Bluetooth®

Handsfree Headset

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your H550.

TURNING HEADSET

ON AND OFF

To turn your headset on, slide the switch

toward the microphone. The indicator light
flashes blue (if paired with another device),
or is steadily blue (if ready to be paired).

To turn your headset off, slide the switch
toward the charging plug. The indicator light
will turn off.

Slide Switch

Indicator Light

EARHOOKS AND YOUR

HEADSET

Your H550 headset is supplied with three earhooks.
The earhook is attached onto a hinge pin, and is
placed onto your ear when using your headset. To
install an earhook on your headset:

Open the attached

1

earhook 90 degrees from
the headset.

Gently lift and pull the

2

top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.

Position the headset for

3

right or left ear use (right
ear use is displayed).

Hook the bottom of the

4

earhook onto the lower
hinge pin, then lift and pull
the top of the earhook
over the upper hinge pin.

040059o

1 Open Earhook

2 Pull Earhook Up

Hinge Pin

WEARING THE

HEADSET

Once you have attached your desired
earhook, follow these steps to wear your
headset on your ear:

Open the attached

1

earhook 45 degrees from
the headset.

2

Loop the earhook over
your ear.

Press earhook to your ear.

3

When worn, your headset
will look like this on your
head:

1

CHANGING VOLUME

BUTTON ORIENTATION

You can also change the orientation of the
volume buttons on your headset.

Turn the headset power off.

1

Press the Volume button you want to

2

assign as the "volume up" button and
slide the switch toward the microphone.
The indicator light is either steadily lit or

3

flashing in blue.

Volume

Buttons

2

Slide
Switch

European Union Directives

Conformance Statement

Hereby, Motorola declares that this
product is in compliance with:

• The essential requirements and
other relevant provisions of Directive
1999/5/EC.

• All other relevant EU Directives.

0168

The above gives an example of a typical Product
Approval Number.

You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.

Product

Approval

Number

MAKING CALLS

Function Action

Make a voice dial call Tap the Call button
and speak the
name after the tone

End a call Tap the Call button

Receive a call Tap the Call button

Reject a call Tap a Volume button

Redial last call Press and hold the
Call button until you
hear a beep

Answer a second Tap the Call button
incoming call

Reject a second Tap a Volume button
incoming call

Note: Your H550 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.

MAKING CALLS

Function Action

End an active call and Tap a Volume button
resume a call on hold

Mute or unmute a call Tap both Volume
buttons

Disable the First slide the switch
indicator light toward charging plug
(to turn headset off),
then press and hold
both Volume
buttons AND slide
the switch towards
the microphone (to
turn headset on)

Note: Some features are phone/network dependent.

CONTINUED

Headset Indicator Headset Status

Steady blue Charging
Off Charging complete

Headset Indicator Headset Status

Off Power off
Steady blue Pairing mode

10 rapid blue/purple Pairing successful
flashes

Slow blue pulse Connected
(on a call)

Slow blue flash Standby
(not on call)

Blue flash Idle (not connected)
Quick blue flash Incoming/outgoing call

Slow purple pulse Connected
(on a muted call)

Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.

INDICATOR LIGHTS

With the Charger Plugged In

With No Charger Plugged In

AUDIO TONES

Audio Tone Headset Status

Single high tone when Volume at minimum
pressing volume button or maximum

Two tones Low battery
repeated every 30 sec.

No audio indications; Out of range
deteriorating quality

Ring tone Incoming call
Single high tone Pairing confirmation
Low to high tone Voice activation
Single high tone End call
Low to high tone Phone network

not available
Two ascending tones Mute enabled
Two descending tones Mute disabled