Cheng Uei Precision Industry H690 User Manual

ontacts

t

f

indicator light will be steadily lit in blue to

indicate headset is in pairing mo

the headset does not enter pairing mode,

TROUBLESHOOTING

for help.

2

S

Handsf

e phone lists Bluetooth

your phone, the indicator light

purple.

pyp g

F

.

Y

d

T

After you have successfully paired your

3

When placing he

non-replaceable battery. Under normal use, the expected life

N

.

for both charging and storage.

ug the Motorola charger into the port o

desk

.

ace head

3

C

(

e

tght

(

dily bluelue

f

)or pairing mode)

pairing mode.pairing mode.

does not enter pairing moddoes not enter pairing mo

3

4

5

Bluetooth devices it finds.Bluetooth devices

SelectSelect

M

0Motorola H690

S

Select

OKOK

or

Yes

hr your head

yy

.our phone

00000000

(

)(for most phones)

Selectelect

OKOK

When your headset successfully pairhen your headset successfully pair

connects with your phonnnects with

changes fromnges from

ace the headset over your ear. Seeace the headset over your ear. See

"Wearing the Headset" on the reverse side"Wearing the Headset" on the reverse side

.of this guide.

O

On the phone, dial the number you want to

call and press

S

SEND

.key on your phone.

paired, you will hear ringing paired you will hear ringing

22

SeeSee

F

dFeatures and

eFunctions Guide

e reverse side

f

nor information on

H690

ghargi

C

C

Note: Headset is not functional w

placing headset on the desktopplacing headset on the desk

charger, tcharger, t

hh

e indicator light turns red

the battery is charging. It may take u

ght to turn

When the headset's battery is fully ch

(ab

(about 2.5 hours), the indicator light tu

.

Note: This pro

ace headset onto desktop charger as shown.ace headset onto desktop charger as shown.

and desktop charger connect.and desktop charge

pg

Mi

ephone

r

ht

on

C

rC

t

PANTONE 8783 C

motorola

H690

Quick Start Guide

Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196

www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)

Guide Number: 6809521A35-A

Bluetooth QD ID: Bxxxxxx

MOTOROLA and the Stylized MLogo are registered in the US
Patent &Trademark Office.The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products.The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.

© Motorola, Inc. 2008

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

BEFORE YOU BEGIN

Take a moment before you get started to familiarize yourself with your new H690
Bluetooth® Handsfree Headset. Along with your headset, a desktop charger is provided

Speaker

Volume
Buttons

Charging
Contacts

on revers

side)

Power
Switch

3

Before you can use your headset, you must pair
(link) it with your phone.

Step A - ENSURE HEADSET IS IN PAIRING
MODE

Remove headset from charging base or
desktop charger and power on by sliding
Power switch to the On position (towards
Power symbol on headset). The indicator light

irst flashes during power up, then initiates

easy pairing. After a few moments, the

If
see

ndicato

g

Your Headse

crophon

ndicator Ligh
stea

or pairing mode

Charging
Contacts

Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (

1

ettings > Connection > Bluetooth Link >

ree > Look for Devices.

Th

otorola H69

elect
our phone

nter the passkey:

Note: These steps are for most Motorola phones.

or other phones, see your phone's user's guide

to pair your headset wit

harge
or

"

Menu) >

for most phones

1

ote: You can only charge the headset via the desktop charger.

ou cannot plug a Motorola charger directly into the headset

Remove plastic seal off of ear cushion on

1

speaker.

Pl

2

top charger

hargin

2

Note: Earhook must be rotated to the orientation
show above to ensure charging contacts connect.

TEST AND USE

4

our phone and headset are now paired an

ready to make and receive calls.

o make a call:

of this guide

n the phone, dial the number you want to

call and press

phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.

END

ey on your phone

CHARGE

Your Headset's Battery

the battery is charging. It may take up to 1
minute for the indicator light to turn on.

When the headset's battery is fully charged

out 2.5 hours), the indicator light turns

green

of the rechargeable battery is approximately 400 charges.

e indicator light turns red when

eatures an

Functions Guid

on the reverse side

or information o
using your H690

START BLUETOOTH

2

Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.

For most Motorola phones (from home screen):

Press (

1

Bluetooth Link > Setup.

2

Scroll to Power.

3

Select Change.

Scroll to On.

4

5

Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.

Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.

My headset will not charge.
Make sure your earhook and ear cushions are
properly orientated. See step 1 and “Ear
Cushions and Your Headset” to see proper
orientation.

My headset will not enter pairing mode.

Make sure thay any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds, then
turn headset back on. Wait for the indicator light
to become steadily lit in blue, indicating the
headset is now in pairing mode.

My phone doesn’t find my headset.

Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).

My headset worked before but now it’s not
working.

Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).

FEATURE

Your Phone

"

Menu) > Settings > Connection >

TROUBLESHOOTING

head

lik

d

.

To wear your headset, flex the earhoo

Note: Your H69

Profiles. Access

profile your phone supports. See your phone's user's guide

n

n

he

Call button until

hea

n

incoming call Volume button

yo

s

level less than 80%

har

ge)

Yellow

e

Available Talk Time

Yell

s

ith No Charger Plugged In

Headset Indicator

oing call

Connected (on a call)

ash Standby (not on a call)

Slow red flash Idle (not connected

)

T

ation.ation.

hear two ascendinghear two ascendin

tones tones

and speak the and speak the

name after the tone name after the tone

you hear an audio you hea

tone tone

.Note: Some features are phone/network depen

ge)e)

Ch

ng (battery

level more than 80% level more than 80%

charge)

G

ChGreen

eg complete

*None Not charging*

When Checking BatWhen Checking Bat

tery Leveltery Level

Headset Indicator AvaiHeadset Indicator Avai

Green G

lugged Inlugged In

OfOf

f Power offf Power of

ffThree blue flashes Powering

S

eeady blue Pairing mo

l

Quick blue flash Incoming/outgoing call

Quick blue flash Incoming/ou

Slow blue pulse Connecteonnecte

Slow blue fl

S

hSwitc

AKING CAAKING CA

PANTONE 8783 C

Features and

Functions Guide

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your H690.

European Union Directives

Conformance Statement

Hereby, Motorola declares that this
product is in compliance with:

• The essential requirements and
other relevant provisions of Directive
1999/5/EC.

• All other relevant EU Directives.

Product

Product

Approval

Approval

Number

The above gives an example of a typical Product
Approval Number.

You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.

Number

TURNING H690

ON AND OFF

To turn ON your H690, slide the Power

switch towards the power symbol, as
shown below. The indicator light first flashes
blue for several seconds, then:

L

flashes blue (if paired and connected with
another device).

L

becomes steadily blue (if ready to be
paired).

To turn OFF your H690, slide the Power
switch off. The indicator light will turn off.

witc

Function Actio

Receive a call Tap the Call button

Mute or unmute a call Tap both Volume
buttons

Reject a call Press and hold a
Volume button until
you hear t wo
descending tones

End a call Tap the Call butto

edial last call Press and hold t

Your H690 headset is supplied with multiple ear
cushions. Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied ear cushions with your headset.

placed onto your ear when using your headset

Function Action

Answer a second Press and hold Call
incoming call button

End an active call and Tap the Call butto
resume a call on hold

Note: Some features are phone/network dependent

EAR CUSHIONS AND YOUR HEADSET

When fitting an oval-shaped ear cushion on
your headset, be sure the cushion is oriented,
as shown below (pointing towards the
microphone).

set’s earpiece speaker

MAKING CALLS

e shown, an

CONTINUED

INDICATOR LIGHT

With the Charger Plugged In

Headset Indicator Headset Statu

Red Charging (battery

c

reen
one Not charging

ow 30 minutes to 5 hour

Red Less than 30 minutes

*See charging guidelines in the Legal and Safety pamphlet,
and remove the charger from the charging case or desktop
stand and plug in again.

arging (battery

arging complet

WEARING THE

HEADSET

Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.

INDICATOR LIGH

W

Three blue flashes Powering on/o

teady blue Pairing mod

Rapid blue/purple flashes Connection successfu

to phone
Slow purple pulse Connected call muted
Quick red flash Low battery

Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.

Note: To disable the indicator light, slide Power switch off, then
press and hold both Volume buttons AND slide Power switch
on (to turn headset on).

CHANGING FOR USE

ON OTHER EAR

You can wear your H690 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:

Gently lift and pull the

1

top of the earhook up
and off speaker stem, as
shown.

Flip the headset over.

2

Attach the earhook to

3

the speaker stem, as
shown.

AUDIO TONES

Audio Tone Headset Status

Ring tone Incoming call
Single high tone Phone net work not

available
High to low tone End call
Single high tone when Volume at minimum

pressing volume button or maximum
during a call

Ascending tone Mute enabled
Low tone Mute reminder

(repeated every
15 seconds)

Descending tone Mute disabled
Low to high tone Connection

confirmation/voice
activation

No audio indications; Out of range
deteriorating quality

Two tones Low battery
repeated every 30 sec.

CHECKING

BATTERY LEVEL

While turned on and not on a call, you can

check your headset’s battery charge level

by pressing and holding both Volume
buttons.

Note: This feature does not work when headset is in
pairing mode.

The indicator light displays charge status
until you release the buttons. See “Indicator
Light” for details on indicator light and
charge status.