Cheng Uei Precision Industry H12 Users Manual

motorola

Power

Charger

the headset does not enter pairing mode,

TROUBLESHOOTING

for help.

Handsf

your phone, the indicator light

pyp g

After you have successfully paired your

ill

hil

with the headset are turned off. If the indicator

dily lit in bl

htght

eblue

)iring mode)

does not enter pairing moddoes not enter pairing mo

Bluetooth devices it finds.Bluetooth devices

Yes

hir your head

.our phone

ectelect

When your headset successfully pairhen your headset successfully pair

ace the headset over your ear. Seeace the headset over your ear. See

.of this guide.

.key on your phone.

rse side

nion on

2H12

lCall

nButton

b3b

ff.hours), the indicator light turns o

p, p

ensuring that charging cont

.headset and charging stand conne

ntacts

e or charger stand.

adset into

.headset and charging case connect.

gCharging

sContacts

nrgin

H12

Quick Start Guide

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196

www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired)

Guide Number: 6809516A34-O

Bluetooth ID: xxxxxx

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

BEFORE YOU BEGIN

Take a moment before you get started to familiarize yourself with your new H12 Bluetooth Handsfree Headset. Along with your headset, both a charger case and charger stand are provided for both charging and storage.

Speaker

witc

Before you can use your headset, you must pair (link) it with your phone.

Step A - ENSURE HEADSET IS IN PAIRING MODE

Remove headset from charging base or stand and power on by sliding Power switch to the On position (towards Power symbol on headset). The indicator light first flashes during power up, then initiates easy pairing. After a

ew moments, the indicator light will be

pairing mode.

If see

utto

Your Headse

Volume Buttons

Indicato

ndicator Lig

steadily blu

for pairing mode

Charger

Charging Contacts (on reverse side)

Cover

hargin ontact

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET

For most Motorola phones:

On your Motorola phone, press (

ettings > Connection > Bluetooth Link >

ree > Look for Devices.

elect

our phone

nter the passkey:

Note: These steps are for most Motorola phones.

or other phones, see your phone's user's guide

otorola H12

to pair your headset wit

Charging Contacts

CHARGE

Important: Your headset must be turned off when charging. If you turned headset on, see “Turning Headset On and Off” on reverse side for details on turning headset off.

case ensuring that charging contacts on the

eadset and charging case connect

Note: Headset is not functional while charging.

TEST AND USE

our phone and headset are now paired an

ready to make and receive calls.

Menu) >

o make a call:

of this guide

n the phone, dial the number you want to

call and press

END

phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.

Your Headset's Battery

, pace headset into

ey on your phone

hours), the indicator light turns o

If using charger stand

stand ensuring that charging contacts on the

eadset and charging stand connect

The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2.5 hours), the indicator light turns off.

Disconnect the charger.

hargi

eatures and

Functions Guide

on the reverse side

or information o

using your H1

ace headset onto

START BLUETOOTH

Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

Press (

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

y headset will not charge

Make sure your headset is turned off when charging. Your headset w charger case w

y headset will not enter pairing mode.

ake sure that any devices previously paired

other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become stea headset is now in pairing mode.

My phone doesn't find my headset.

Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).

My headset worked before but now it's not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).

FEATURE

Your Phone

Menu) > Settings > Connection >

TROUBLESHOOTING

not charge in the

e powered on.

ue, indicating the

ldi

The indi

Call button until

hea

you hear

ble

charge)

Yellow

Up to 6 hours

30 minutes to 5 hours

oing call

Connected (on a call)

)

headset over.

You can wear your H12 headset on your le

Features and

2 supports both Handsfree and Headset 2 supports both Handsfree and Headset

hear two ascendinghear two ascendin

tones tones

and speak the and speak the

name after the tone name after the tone

you hear an audio y

tone tone

ndicator light off, then p

hold bo

AND

buttons AN

slide Power switch

on (to turn

headset on). headset on).

ng (battery

level more than 80% level more than 80

charge)

eGreen Charging complete

When Checking Baten Checking B

level

Yellow Ye

ffThree blue flashes Powering

eue Pairing mo

rPow

hSwitc

ndicator

headset’s performance is greatly

AKING CAAKING CA

.shown.

Functions Guide

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

of your H12.

TURNING HEADSET ON

AND OFF

To turn your headset on, slide the Power

switch on (towards Power symbol on headset). The indicator light flashes blue and purple for several seconds then flashes blue (if paired and connected with another device), or is steadily blue (if ready to be paired).

To turn your headset off, slide the Power switch off. The indicator light will turn off.

owe witc

EARBUDS AND YOUR

HEADSET

Your H12 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset’s earpiece speaker, and placed onto your ear when using your headset.

Your headset’s performance is greatly

WEARING THE

HEADSET

To wear your headset, flex the earhook and loop it over your ear as shown.

e sure to position the ear bud into your ear canal for optimal audio performance and comfort.

CHANGING FOR USE

ON OTHER EAR

ently lift and pull the top of the earhook u and off speaker stem as shown

ttach the earhook to the speaker stem as shown

CHECKING

BATTERY LEVEL

While turned on and not on a call, you can

check your headset’s battery charge level

y pressing and ho uttons.

until you release the buttons. See “Indicator Light” for details on indicator light and charge status

ng both Volume

cator light displays charge status

STORING YOUR

HEADSET

Both the charger case and charger stand are used to charge and store your headset. When not using your headset, you should place it in the charger base or stand. Be sure to turn the headset off before placing it into the charger case or charger stand.

For the charger case, a cover can be placed on top of the case, or underneath it to provide support for desktop placement as shown

European Union Directives

Conformance Statement

Hereby, Motorola declares that this product is in compliance with:

• The essential requirements and other relevant provisions of Directive 1999/5/EC.

• All other relevant EU Directives.

Product

Approval

The above gives an example of a typical Product Approval Number.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.

Number

Function Actio

Receive a call Tap the Call button

Mute or unmute a call Tap both Volume buttons

Reject a call Press and hold a Volume button until you hear t wo descending tones

End a call Tap the Call butto

edial last call Press and hold t

Function Action

Answer a second Tap the Call button incoming call

End an active call and Tap the Call button resume a call on hold

eject a second Press and hold eithe

indicator light off, then press and hold both Volume buttons slide on (to turn

MAKING CALLS

CONTINUED

ower switch

INDICATOR LIGHT

With the Charger Plugged In

Headset Indicator Headset Statu

Red Charging (battery level less t

arging (battery

reen Charging complet

ery Leve

INDICATOR LIGH

Three blue flashes Powering on/o

teady blue Pairing mod

Rapid blue/purple flashes Connection successfu

to phone Slow purple pulse Connected call muted Quick red flash Low battery

Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.

AUDIO TONES

Audio Tone Headset Status

Ring tone Incoming call

ingle high tone Phone network not

availa

gh to low tone End ca

ingle high tone when Volume at minimu

pressing volume button or maximu

uring a ca

wo ascending tones Mute enable Two descending tones Mute disabled Low to high tone Connection

confirmation/voice activation

No audio indications; Out of range deteriorating quality

Two tones Low battery repeated every 30 sec.

ADDITIONAL SAFETY

INFORMATION

Along with instructions in the Safety and Legal Information pamphlet, please note the following additional safety instructions.

Do not store or use headset in temperatures lower than -10°C / -4°F or higher than 50°C / 122°F.

Do not recharge headset in temperatures lower than 0°C / 32°F or higher than 40°C / 104°F.

Conditions inside a parked car can exceed this temperature range. Do not store headset in a parked car.

Do not store headset in direct sunlight.

Storing headset fully charged in high temperature conditions may permanently reduce the life of the internal battery.

Battery life may temporarily shorten in low-temperature conditions.

+ 2 hidden pages