Chengdu NTS Technology Z11M Users manual

Smarter RF Pico

Installation

Manual

Easier Touching

More Touched

Advanced Wireless Coverage Solution

Installation

Installation

Guide

Guide

Dual Band（800/1900 MHz） Wireless SOHO Signal Booster

1 WHAT IS Smarter RF Pico?……………………………………………………………………… 1

2 PACKAGE ITEMS…………………………………………………………………………………1

3 INSTALLATION INSTRUCTIONS………… ……… ………… ……… ………… ……… ………2

3.1 How to install……… ………… ………… …………………………………………… ………2

3.2 Mounting Guide……………………… …………… ……………………… …………………2

3.3 Reasons for Weak Cellular Signals…………………………………………………………3

3.4 Outdoor Antenna Installation…………………………………………………………………4

3.5 Right direction for the Outdoor Antenna……………………………………………………4

3.6 Where is the Strongest Signal?… ……… ……… ……… ……… ……… …………………5

3.7 Tips for Running Outdoor Antenna Cable……………… ……… ………… ……… ………5

3.8 Installing the Indoor Antenna…………………………………………………………………6

3.9 Installing the Signal Booster…………………………………………………………………6

3.10 Mounting tips…………………………………………………………………………………6

4 TROUBLESHOOTING FOR SIGNAL BOOSTER LIGHTS… … … … … … … … … … … 7

5 WARNINGS… … … … … … … … … … … … … … … … … … … … … … … … … … … … 7

6 RECOMMENDATIONS… … … … … … … … … … … … … … … … … … … … … … … … 8

7 WARRANTY… … … … … … … … … … … … … … … … … … … … … … … … … … … … 8

7.1 30-Day Money-Back Guarantee…… ……… ……… ……… ……… ……… ……… ……8

7.2 Year Warranty……… …………… …… …… …… …………… …… …… …… …………… 8

7.3 Disclaimer:……………………………………………………… ………… ………… ………8

8 TECHNICAL SPECIFICATIONS……… …… …… …………… …… …… …… …… …………9

9 FCC Statement………………………… ……………… ……………… …………………………9

10 FCC Radiation Exposure Statement…… ……………… ……………………………………10

Appearance of device and accessories may vary.

Note: This manual contains important safety and operating
information. Please read and follow the instructions mentioned.

Installation Guide

Model Z11MA Z11MB

:

FCC ID:P6HZ11M

1.What is ?

1.1 It amplifies a weak or shadowed signal in mobile, in-building

applications. When using a Smarter RF Pico product in conjunction with our
antennas, the outdoor antenna will collect the cell tower signal and send it
through the cable to the Signal Booster. The signal is amplified and
retransmitted through the Indoor Antenna into the room. Cell phones in that
area then communicate with the enhanced signals. When a cell phone or
cellular device transmits, the signal is received by the Indoor Antenna, then
amplified by the Smarter RF Pico product and went back to the cell tower
through the Outdoor Antenna.

Smarter RF Pico

2.Package Items

Smarter RF Pico

Accessories:

① ② ③ ④ ⑥⑤

Notes:

1:Ou tdo or An te nn a Op ti ons :

2:I nd oo r Ant en na O pti on s:③ ④

① ②

3:Cable s:⑤
4: AC/ DC p ow er s up pl y:⑥

Appearance of device and accessories may vary
Contact our customer service with any questions at 905-604-3748. Hours:
10 am-5pm MST

01

Installation Guide

3.Installation Instructions

3.1 How to install

3.1.1 Select a location to install the Signal Booster that is away from

excessive heat, direct sunlight, moisture and has proper ventilation. Do not

Smarter RF Pico

place the Signal Booster in an air-tight enclosure.

3.1.2 Select a location on the roof of the building to install the Outdoor
Antenna. Use a cell phone in test mode to find the strongest signal from the
cell tower.

3.1.3 Operate the Outdoor Antenna cable to the Signal Booster and attach
it to the connector on the Signal Booster. Operate the Indoor Antenna cable
to the Signal Booster and attach it to the connector on the Signal Booster.
Lightning Surge Protection is recommended for all in-building installations.

3.1.4 Select a location for the Indoor Antenna, preferably in the center of
where the signal needs to be amplified. A minimum separation distance of
20 vertical (within the null zone) or 50 horizontal feet is necessary for proper
operation. If the inside coverage is not sufficient you may need to increase
the separation distance even further.

3.1.5 Before powering up the Signal Booster, verify that both the Outdoor
Antenna and the Indoor Antenna are connected and check that all
connections are tight. Note: Be careful when plugging the connectors in so
as not to bend the center pins on the connectors.

3.1.6 The Signal Booster has been packaged with the gain control knobs
adjusted to the highest gain position. If one or both of the lights are not
green, please refer to page (xxx).

Warning: Connecting the Signal Booster directly to a cell phone with
use of an adapter may harm the cell phone and /or the Signal Booster.

3.2 Mounting Guide

3.2.1 Note: Indoor Antenna may be mounted on the wall directly under the

Outdoor Antenna, in the null zone, if 20 feet of vertical separation can be
maintained.

3.2.2 Null Zone：The area under the Outdoor Antenna, Where the Outdoor
Antenna emits the least.

3.2.3 Note: A Lightning Surge Protector is recommended for all building
installations (sold separately). Make sure the protector is installed in line
between the Outdoor Antenna and the Signal Booster.

02